I finally did finish off the amplifier! I bought an unfinished maple box on E-Bay for about$15, and drilled it out, then stained it. It took a good weekend to put everything together, but I'm really happy with it. I decided to use only one of the amp modules, so it's rated at 125W a channel 8 ohm, 250W a channel 4 ohm. The switched mode power supply is rated 500W continuous. I've been able to crank it all the way up and it does not trip out and sounds great. I keep it propped open slightly when I'm usingit so the air has a place to escape. It's a very low speed fan, almost silent, and the amp stays nice and cool (the heatsinks are barely warm to the touch). It's a nice little converation piece for the bar area.





LFR1100 Actives,QS10HPx2,QS8x2,EP800,M3x4,M3x2 (Wood),M5HPx2 (Wood),AxiomAir,ADA1500-8,ADA1500-7