Power Consumption
|
Joined: Sep 2005
Posts: 317
devotee
|
OP
devotee
Joined: Sep 2005
Posts: 317 |
Maybe someone can clear this up for me. I was bored this afternoon so I decided to figure out exactly how much power im using on my 15 amp power circuit in my living room.
I came to the conclusion that my Home Theater without the sub uses 829 Watts or 6.9 Amps. I then did the math with the subwoofer added in. Using the 675 Watt or 5.6 amp power consumption spec for the EP500 sub. I came up with a total of 12.5 amps.
Now, with that said, there is also a ceiling fan and lights on this circuit. With that added in, the total is 17amps!
Can someone please explain how I am using 17amps of power on a 15amp circuit???
My house was built less then a year ago so all the electrical wiring was done under heavy codes I assume. Can someone help me shed some light on this. Even if I was mistaken and it was a 20amp circuit (which it isnt) I would still be comming very close to the 80% load on the circuit.
Thanks for the help.
|
|
|
Re: Power Consumption
|
Joined: Dec 2003
Posts: 3,602
connoisseur
|
connoisseur
Joined: Dec 2003
Posts: 3,602 |
Sure... your amplifiers wouldn't draw the number of watts they're rated for unless you were arc-welding with them... at regular levels, you'd be able to count the power consumption in watts on one hand.
Bren R.
|
|
|
Re: Power Consumption
|
Joined: May 2003
Posts: 18,044
shareholder in the making
|
shareholder in the making
Joined: May 2003
Posts: 18,044 |
So, uh, how do we arc weld with our amps? I kind of like multi function products...
I am the Doctor, and THIS... is my SPOON!
|
|
|
Re: Power Consumption
|
Joined: Sep 2005
Posts: 317
devotee
|
OP
devotee
Joined: Sep 2005
Posts: 317 |
Quote:
Sure... your amplifiers wouldn't draw the number of watts they're rated for unless you were arc-welding with them... at regular levels, you'd be able to count the power consumption in watts on one hand.
Bren R.
ah, ok that makes sense. thanks
|
|
|
Re: Power Consumption
|
Joined: May 2002
Posts: 10,654
shareholder in the making
|
shareholder in the making
Joined: May 2002
Posts: 10,654 |
Jay, apparently you were using maximum power figures which are rarely(maybe never)used. A speaker playing at a comfortably loud level uses about 1 watt. Split-second peaks can use much more, but it wouldn't be likely to be more than about 100 watts. Using maximum power on all the channels simultaneously can be tested in the lab, but doesn't happen in home audio.
-----------------------------------
Enjoy the music, not the equipment.
|
|
|
Re: Power Consumption
|
Joined: Sep 2005
Posts: 317
devotee
|
OP
devotee
Joined: Sep 2005
Posts: 317 |
Quote:
Jay, apparently you were using maximum power figures which are rarely(maybe never)used. A speaker playing at a comfortably loud level uses about 1 watt. Split-second peaks can use much more, but it wouldn't be likely to be more than about 100 watts. Using maximum power on all the channels simultaneously can be tested in the lab, but doesn't happen in home audio.
yes, i was using the power rating on the back of all my gear, DVR, TV, DVD player, and so on. i didnt realize those numbers are for MAX use. i thought it was just a number that the product required.
i knew you guys would clear it up for me.
thanks again
|
|
|
Re: Power Consumption
|
Joined: May 2002
Posts: 10,654
shareholder in the making
|
shareholder in the making
Joined: May 2002
Posts: 10,654 |
Okay, this gets more complicated, but when there's a power consumption number given it usually isn't at maximum power(unless it specifically said maximum). Usually for a receiver it's how much power is consumed with all channels operating at 1/8th of maximum. That may sound odd, but it's part of the Underwriters Laboratory requirement for testing for overheating. Example: 7x100 watt amps, 1/8th of that is about 90 watts, at 1/8th power this class of amp is roughly 20% efficient and would consume about 450 watts to output 90, and the 450 watt consumption figure might be on the back of the receiver.
-----------------------------------
Enjoy the music, not the equipment.
|
|
|
Re: Power Consumption
|
Joined: Sep 2005
Posts: 317
devotee
|
OP
devotee
Joined: Sep 2005
Posts: 317 |
Quote:
Okay, this gets more complicated, but when there's a power consumption number given it usually isn't at maximum power(unless it specifically said maximum). Usually for a receiver it's how much power is consumed with all channels operating at 1/8th of maximum. That may sound odd, but it's part of the Underwriters Laboratory requirement for testing for overheating. Example: 7x100 watt amps, 1/8th of that is about 90 watts, at 1/8th power this class of amp is roughly 20% efficient and would consume about 450 watts to output 90, and the 450 watt consumption figure might be on the back of the receiver.
Ok got ya. Thanks.
2 more questions.
1. Is it correct to assume that it dosent matter if everything is plugged into 1 outlet or if everything is spread across the whole circuit. Aslong as the load isnt greater then 15amps it dosent matter. Is my thinking correct or no?
2. On the Outlaw sub that I have ordered. Its specs are as follows:
150WRMS/800W Peak
Power Outlet Requirement 300Watts
Can someone explain to me what "RMS" is and what exactly the peak spec means. Also, the power outlet requirement is 300watts yet the sub has a peak level of 800watts. Dosent this mean that at some point the sub may require 800watts? If so why would its requirement only be set at 300watts in the spec?
thanks
|
|
|
Re: Power Consumption
|
Joined: Feb 2004
Posts: 1,863
connoisseur
|
connoisseur
Joined: Feb 2004
Posts: 1,863 |
rms = root mean squared, that is the number you want to go buy, in an ac signal, you can do some math and determin how much real power is being provied all the time, vice peak power, which is usualy double rms power, that is the difference between 1 wave and the next, the maximum difference in potential, a lot of car amp companies will rate their products with peak power, to get larger numbers, when the rms number is what you really care about. hope this explains it, if anyone can add anything feel free. link http://en.wikipedia.org/wiki/Root-mean-square
Last edited by dakkon; 06/10/06 02:42 PM.
|
|
|
Re: Power Consumption
|
Joined: Apr 2005
Posts: 2,339
connoisseur
|
connoisseur
Joined: Apr 2005
Posts: 2,339 |
I have my whole HT including TV, sub, 3 channel amp and 3 monoblocks on my powercenter and only pull 6 amps when the system is cranked.
|
|
|
Forums16
Topics24,964
Posts442,603
Members15,631
|
Most Online2,699 Aug 8th, 2024
|
|
0 members (),
1,030
guests, and
3
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|