Previous Thread
Next Thread
Print Thread
Rate Thread
Page 11 of 18 1 2 9 10 11 12 13 17 18
Re: Denon 3808CI – one week later
Hansang #187032 12/07/07 08:59 PM
Joined: Apr 2007
Posts: 4,877
connoisseur
Offline
connoisseur
Joined: Apr 2007
Posts: 4,877
I am not sure that I am happy with the audyssey results for room eq.

I was just watching the eagles live from melbourne HD-DVD and with the audysey eq on, bass was almost not even noticeable.... Turning it to 'off' or 'bypass L/R' created a much fuller, deeper bass.

I think in an attempt to eliminate the boominess of bass the audessey has killed it completely...

anyone else experience this?

I think if I use the bypass l/r mode then I can still take advantage of the room eq for my center and surrounds, but the low end will not be eliminated from my tower speakers.

what do you guys think? maybe I should re-run the auto setup this weekened and see if I get better results.

Last edited by terzaghi; 12/07/07 09:00 PM.

-David
Re: Denon 3808CI – one week later
terzaghi #187041 12/07/07 09:32 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Personnally I would set it up myself with an SPL meter as you seem to not like the settings it is giving you.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Denon 3808CI – one week later
jakewash #187053 12/08/07 12:41 AM
Joined: Apr 2007
Posts: 4,877
connoisseur
Offline
connoisseur
Joined: Apr 2007
Posts: 4,877
I am actually fine with most of the adjustements audyssey has made. The distances were right on, and all speakers were calibrated equally. I did adjust my right surround down 1/2 a db so that it would read 75db alog with the others. I am just not sure if I like the room eq adjustments, but those are easily disabled.

I may turn the gain down on my subwoofer and calibrate with an spl meter to get the sub at about 75 db when it is set at 0 instead of -12 db.

Someone at AVS suggested that may improve my bass with the audyssey eq, and that I could even run the audyssey settings again with the sub calibrated before hand.

i am not sure why any of that would make a difference, but I may give it a shot.

Things are sounding really good now. I popped in the 300 on HD DVD and watched about 5 minutes if it.

The WB intro scene had tons of LFE!




Last edited by terzaghi; 12/08/07 12:46 AM.

-David
Re: Denon 3808CI – one week later
terzaghi #187063 12/08/07 02:55 AM
Joined: May 2002
Posts: 10,654
shareholder in the making
Offline
shareholder in the making
Joined: May 2002
Posts: 10,654
T, you should consider that maybe bass "almost not even noticeable" is the way things should be, which Audyssey has recognized, but you want to hear more. As I've pointed out frequently, the sub isn't supposed to be audible as a separate entity; the impression should be that it isn't on, but the speakers are putting out more bass. It's quite frequent for subs to be run too "hot" because folks want to hear all that money they spent on them, but high fidelity implies a more natural balance. Again, however, the option is always there to turn it up a bit over the calibrated level.


-----------------------------------

Enjoy the music, not the equipment.


Re: Denon 3808CI – one week later
JohnK #187068 12/08/07 03:21 AM
Joined: Apr 2007
Posts: 4,877
connoisseur
Offline
connoisseur
Joined: Apr 2007
Posts: 4,877
I think the sub is running about the same whether the audyssey eq is on or off. I beleive it is the m80's that sound much thinner when the audyssey eq is on. When I put the audyssey eq on 'bypass L/R' They sound much more 'full'. I don't think this makes any changes to the sub at all

Now which one is right I don't know, but the m80's sound better to me with no audyssey equalization.

I may try and run the audessey set up agqain with my sub pre-calibrated as I mentioned... I still don't see how that could make a difference but who knows.

Last edited by terzaghi; 12/08/07 03:24 AM.

-David
Re: Denon 3808CI – one week later
terzaghi #187110 12/08/07 03:56 PM
Joined: Jul 2004
Posts: 4,444
Likes: 16
M
connoisseur
OP Offline
connoisseur
M
Joined: Jul 2004
Posts: 4,444
Likes: 16
Pull up the EQ graphs and tell us where Audysey put the FR bands for the mains. You may just need to bump up / down one of the bands to get the sound you want. It has my M80’s 6 db low at 62H. I raised them to 0 and it made a world of difference….to the better.

Re: Denon 3808CI – one week later
michael_d #187133 12/08/07 07:04 PM
Joined: Apr 2007
Posts: 4,877
connoisseur
Offline
connoisseur
Joined: Apr 2007
Posts: 4,877
Exactly where do I need to go to look at this and what exactly am I looking for?'

I think I found the eq graphs at auto setup-> parameter check-> room eq or something along those lines.

I am not sure if this is what you are talking about, or what to look for from here.


The audyssey EQ curve shows a steep drop that looks like an upside down triangle from about 40 hz to 100 hz for the L/R mains. The peak of the triangle goes down to about -18db.

This can't be good can it?
Thanks,

T

Last edited by terzaghi; 12/08/07 07:09 PM.

-David
Re: Denon 3808CI – one week later
terzaghi #187150 12/08/07 10:17 PM
Joined: Jul 2004
Posts: 4,444
Likes: 16
M
connoisseur
OP Offline
connoisseur
M
Joined: Jul 2004
Posts: 4,444
Likes: 16
I’m not saying it’s good or bad. Audysey thinks that is what’s needed to produce a “like” FR from all speakers according to your particular room acoustics.

Why not try a manual setting? It can’t hurt anything as you can always revert back to the auto settings.

Just go into the manual set up, select “copy curve” and it will take you to the next screen where you can then raise / lower all nine bands at will. After you play with them, just toggle between your manual settings and the Audysey settings. I would start out with adjusting the mains first. Just take it in small steps so you can track the changes and see / hear the differences.

I found that with the Audesey settings, I felt as if the mid range was lacking. I bumped up the mains in the mid range and couldn’t be happier. That may be all you need to do.

Re: Denon 3808CI – one week later
michael_d #187204 12/09/07 04:47 PM
Joined: Apr 2007
Posts: 4,877
connoisseur
Offline
connoisseur
Joined: Apr 2007
Posts: 4,877
The denon had my fronts set to -10db at the 63 Hz mark. I changed them both to -5db and noticed a significant improvement.

When I have more time I will do more comparison.

At this point the audessey curve has a lack of bass for most sources/types of music (it actually sounds pretty good on some of them), and turning off the audessey curve or bypassing the mains leaves the bass a little too boomy and in your face. I think I can find something in between that suits my tastes. With the 63 Hz set at -5db it seems ok, allthough I may adjust this a bit later when I find some more time for comparison.

Thanks,
T


-David
Re: Denon 3808CI – one week later
terzaghi #187402 12/11/07 03:10 AM
Joined: Feb 2007
Posts: 602
H
aficionado
Offline
aficionado
H
Joined: Feb 2007
Posts: 602
Damn...I can't make up my mind! I need to buy an AVR for my brother in law. It's either the Denon 3808 or Marantz 8002.

I have the 8001 now and like it, but I *hate* the fact that I have to take it in to a service center to get the FW upgraded. HDMI 1.3 (and various HD audio decode) being what it is, I'm *sure* upgrades will be required. That alone may tip it in the Denon's favor.

Feature set wise, I don't think I can go wrong with either unit. But since I've never owned a Denon, I'm going on reputation alone. That and reading every post on the AVS forum about the units. So far, there doesn't seem to be too many complaints. Damn, I hate being indecisive!


--
Denon 4520, EPIC80/500/VP180 Speakers
Page 11 of 18 1 2 9 10 11 12 13 17 18

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,939
Posts442,452
Members15,615
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 221 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4