Axiom Home Page Forums General Discussion Technical Questions Sub cable help

The one here stocks them, also some car audio shops are a good place to find them.

so you just used their Gold series Y Cable to split out the back of your Rotel? I think my plan is since the SMS-1 has 3 LFE out ports, I will hook the 350v3's to that and adjust the freq for best results. Since the 600 is DSP controlled I'm not going to have it running through the SMS-1, just basically use it as an "anchor" as Jakeman likes to say.

I don't any more, I have the ICBM now. I used to use them in that fashion.

Rat Shack stores in our area carry those Monsters and the other brands, I'll go there for hard to find connectors and associated hardware only. Our local Home Depot and Lowes are both now carrying just about most A/V interconnects, cables and etc... that I'll most often need.

I will be out today to Wally World and a few other places, I'll see what I can find.. I also am going to need additional coax for all the subs, and maybe a real long length to reach the 600, wherever it ends up. The 20 ft blue jeans cable I have is very flexible on placement, but was a bit pricey. Monoprice has very cheap/high quality subwoofer coax, but not sure it is as flexible. I suppise the RG59 is a little better than the RG6 in that category...

You might be able to find RG59F, F for flex. I have used it to make my own interconnects.

RickF, I thought you had to work today? 4 hrs total drive time tells me you only worked about 3-4 hrs?

No luck at Wally World or Menards, just some really cheap thin guage splitters. Will try Home Depot and The Shack next.

Car audio shops normally carry them.

Strange, why car audio, and not stores that sell home audio cables? Seems more specific to home audio coax applications..