Previous Thread
Next Thread
Print Thread
Rate Thread
Page 6 of 33 1 2 4 5 6 7 8 32 33
Re: EP350v2 versus EP350v3 specs
doormat #198621 03/01/08 07:19 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Yeah, but I have two on order, not just one. ????


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: EP350v2 versus EP350v3 specs
SirQuack #198640 03/01/08 09:46 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Unboxing these beasts now, they are awesome looking in custom Ebony Pica.

Anyway, for the other folks that have the new 350v3, did the box say "EP350v3 200 watts" on the side? I thought these were bumped up to 300 watts, according to the specs on the product page?


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: EP350v2 versus EP350v3 specs
SirQuack #198644 03/01/08 10:32 PM
Joined: Oct 2007
Posts: 395
devotee
Offline
devotee
Joined: Oct 2007
Posts: 395
Yeah, I brought that up in the "... now shipping" thread . I think we just attributed that to the fact that the boxes were ordered before the final stats were known. Or a mistake in printing.

Re: EP350v2 versus EP350v3 specs
doormat #198646 03/01/08 10:46 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
I've got them hooked up and trying to run my receiver calibration to balance everything. One of them as nothing coming out the driver. STarting my troubleshooting, hope it is something simple like a cable that came loose...


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: EP350v2 versus EP350v3 specs
SirQuack #198648 03/01/08 11:13 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
gotter done, the black wire for one of the drivers was not even hooked up, all is well and the rumbling as begun.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: EP350v2 versus EP350v3 specs
SirQuack #198742 03/03/08 12:19 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
24 hrs later and still no initial thoughts? hmmmmm......must be having too much fun setting things up.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: EP350v2 versus EP350v3 specs
jakewash #198744 03/03/08 12:26 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
I've been spending a lot of time trying to get everything calibrated. My initial plan was to use the Velodyne SMS-1 to adjust the 350's and let the 600 just go through the receiver. The freq response was very smooth with no EQ. The problem was when I tried to adjust down some of the peaks using the sms-1(which generally is very easy to do) they actually got higher. I think it has something to do with interactions from having multiple subs and all the waves bouncig/colliding with each other.

I'm tossing around the idea of using the SMS-1 to find the best placement for my subs and then sell it.

My main problem is trying to calibrate SPL with the meter. I calibrated them all to 75dB's individually, but when they are all on, the dB's jump by about 9 dB's. Maybe I'm supposed to calibrate them lower so the sum gets me back to match the other speakers.

The 600 is crazy, I have to have the volume on the 600 at the lowest MIN setting and my Denon at -5dB and it is still higher than 75dB's on the meter, that is crazy. Because of this I have to really turn up the gain on the 350's, since the Denon is at -5dB. arggggggg


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: EP350v2 versus EP350v3 specs
SirQuack #198748 03/03/08 12:37 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
The joy of mismatched subs


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: EP350v2 versus EP350v3 specs
jakewash #198751 03/03/08 12:40 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Not sure that is it, I talked to Ian and Jakeman. Both said the 350v3s would match well to the 600. I think part of the problem is my Denon 2805. I know Alan and other say to put it at 0 for the sub level and then adjust up/down form the sub. There is no way I can do that with the 600. I would be hitting 90dB's with the receiver pink noise.

I think mojo has to run his Denon at -9. The subs sound awesome togethor, I'm just trying to figure out the best way to calibrate them all.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: EP350v2 versus EP350v3 specs
SirQuack #198757 03/03/08 12:49 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
I think I might try to set the 600 to where you wnat and then bring the 350's up to match it.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Page 6 of 33 1 2 4 5 6 7 8 32 33

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,939
Posts442,452
Members15,615
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
1 members (BBIBH), 226 guests, and 1 robot.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4