Previous Thread
Next Thread
Print Thread
Rate Thread
Page 4 of 6 1 2 3 4 5 6
Re: Graphs multiple subs multiple seats.
SirQuack #201692 03/24/08 07:17 PM
Joined: Jan 2007
Posts: 10,490
Likes: 116
M
shareholder in the making
Offline
shareholder in the making
M
Joined: Jan 2007
Posts: 10,490
Likes: 116
Try the 600 out of phase and the 350s in phase but with the 350s pointing to the screen wall instead of facing you.


House of the Rising Sone
Out in the mid or far field
Dedicated mid-woofers are over-rated
Re: Graphs multiple subs multiple seats.
SirQuack #201695 03/24/08 07:19 PM
Joined: Mar 2008
Posts: 1,378
connoisseur
Offline
connoisseur
Joined: Mar 2008
Posts: 1,378
 Originally Posted By: sirquack
I know Sean, I think part of my problem stem from that I don't have a rectangular room. I know I keep showing my room picture hoping someone will say, oh, just put your subs there.....

As you can see my theater area is pushed over into the left side corner, so central on my screen wall, is not central of the room. Also, there is a huge hallway next to the bar leading into the other side of the basement.



Since bass nulls usually occur at halway points in the room, and the flattest bass response usually occurs at 38% off a wall, I would try to place the subs against a wall that a red line hits, and try to sit where green lines intersect.

Regards





LFR1100 Actives,QS10HPx2,QS8x2,EP800,M3x4,M3x2 (Wood),M5HPx2 (Wood),AxiomAir,ADA1500-8,ADA1500-7
Re: Graphs multiple subs multiple seats.
SRoode #201697 03/24/08 08:27 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Thanks,

Actually my drawing is not to scale and my seats are following the 38% rule as defined by Ethan Winer at Realtraps. The regulars around here remember when I spent countless hours building my bass traps and panels and room layout per his suggestions. \:\)


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Graphs multiple subs multiple seats.
SirQuack #201700 03/24/08 09:21 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
 Originally Posted By: sirquack
Thanks,
I spent countless hours building my bass traps and panels and room layout per his suggestions. \:\)


And look where that got you;\)


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Graphs multiple subs multiple seats.
jakewash #201701 03/24/08 09:28 PM
Joined: Jan 2007
Posts: 10,490
Likes: 116
M
shareholder in the making
Offline
shareholder in the making
M
Joined: Jan 2007
Posts: 10,490
Likes: 116
I didn't want to say it but since you brought it up Jason, my bass response is flatter than Randy's up to 100Hz. And we all know how bright my room is.


House of the Rising Sone
Out in the mid or far field
Dedicated mid-woofers are over-rated
Re: Graphs multiple subs multiple seats.
SirQuack #201703 03/24/08 09:45 PM
Joined: Mar 2008
Posts: 1,378
connoisseur
Offline
connoisseur
Joined: Mar 2008
Posts: 1,378
 Originally Posted By: sirquack
Thanks,

Actually my drawing is not to scale and my seats are following the 38% rule as defined by Ethan Winer at Realtraps. The regulars around here remember when I spent countless hours building my bass traps and panels and room layout per his suggestions. \:\)



I checked out your web page from your profile. VERY NICE SETUP QUACK! I see you drew the 38% lines, my bad.


LFR1100 Actives,QS10HPx2,QS8x2,EP800,M3x4,M3x2 (Wood),M5HPx2 (Wood),AxiomAir,ADA1500-8,ADA1500-7
Re: Graphs multiple subs multiple seats.
SRoode #201705 03/24/08 10:12 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Next step "Tear Down those Traps Mr Porter". \:\)


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Graphs multiple subs multiple seats.
SirQuack #201706 03/24/08 10:16 PM
Joined: Oct 2007
Posts: 395
devotee
Offline
devotee
Joined: Oct 2007
Posts: 395
 Originally Posted By: sirquack
For those that have a 350v3 and an SPL meter, can you put the dial on 60dB selection and place your mic about an inch from the sub grill cover, I'm getting 60dB's with nothing playing.

This is the buzzing I'm hearing, maybe my ears are sensitive, not sure. Sounds like the buzz you hear from a transformer station.


Not sure if you still care, but my 350 also has a 60dB hum with nothing playing. It's on its own outlet on the front wall, Rx is on the back wall.

You're ears are definitely more sensitive than mine; I had to put my ear an inch away to hear it.


M80s/VP160/QS8s/EP350; M22s; M3s.
Re: Graphs multiple subs multiple seats.
doormat #201707 03/24/08 11:27 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
I suppose with 2 350's I get a 6dB combined gain. \:\) Thanks for checking.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Graphs multiple subs multiple seats.
SirQuack #201923 03/26/08 01:36 AM
Joined: Apr 2003
Posts: 16,441
shareholder in the making
Offline
shareholder in the making
Joined: Apr 2003
Posts: 16,441
Randy, I think I found your problem. See the ground loops in front of your equipment rack?



Page 4 of 6 1 2 3 4 5 6

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,945
Posts442,484
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 940 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4