|
Input selector needed
|
Joined: Mar 2005
Posts: 41
buff
|
OP
buff
Joined: Mar 2005
Posts: 41 |
I've had a pair of M3s for awhile and after setting up multiple systems around the house ended up hooking our old (late 70s) Kenwood KR2600 receiver to them. This setup is the sweetest these speakers have ever sounded -- better than all the digitals that preceded.
Problem-- the 2600 has very few inputs. In that room, I've wanted to play my Sirius radio hookup. However my Sirius hookup is to a Sony home theater receiver. On previous forum input I found I could do a "tape out" from the Sony cabled to the "tape in" port of the Kenwood to hear Sirius.
But when I do this, all other audio from the Kenwood sounds quite muffled, for lack of a better word. I tried a cheapo audio selector box that I got from Radio Shack a long time ago, but the other inputs still sounded muffled -- and the Sirius sounded very faint.
Is there a good audio switch that I could plug into the Kenwood Tape In that would really isolate the Sony when it's off and stop muffling the other inputs? I also have a cassette player that would utilize another port of a switch. And I'd tried a Y adapter to input both the cassette and Sony cables into the Kenwood's Tape In, but that produced the muffling of other devices too.
I'd like to have something that could keep everything attached instead of constantly attaching and removing the cables from the Sony everytime I want to listen to satellite radio ...
|
|
|
Re: Input selector needed
|
Joined: Dec 2001
Posts: 334 Likes: 5
Axiom Engineer devotee
|
Axiom Engineer devotee
Joined: Dec 2001
Posts: 334 Likes: 5 |
I would try plugging the cables from your Sony into the AUX input on the Kenwood. If you still get a muffled sound the problem lies with the tape output on the Sony which might have a problem driving the long lines to the Kenwood. If you let me know what model your Sony is I can see if there is a better method of getting a signal to the Kenwood.
|
|
|
Re: Input selector needed
|
Joined: Mar 2005
Posts: 41
buff
|
OP
buff
Joined: Mar 2005
Posts: 41 |
OK, tried Sony into the AUX on Kenwood. Because there are so few inputs on the Kenwood, seemed like the only other source I could play to test with Sony into Aux was the phono. The sound reduction when plugging the Sony in and out of the Aux was pretty subtle (had to close my eyes and 'feel' it).
Thinking maybe less of a muffling because of the Kenwood's built-in phono capability (pre-amp?).
Change in sound was just as subtle with the tuner (also built in?)
So muffling much (much!) more pronounced with the Sony to Kenwood tape in and CD plugged into Kenwood's Aux, and playing a CD.
Sony is an STR-DH700.
|
|
|
Re: Input selector needed
|
Joined: Dec 2001
Posts: 334 Likes: 5
Axiom Engineer devotee
|
Axiom Engineer devotee
Joined: Dec 2001
Posts: 334 Likes: 5 |
Strange...I can't see a Tape Out on the back of your Sony from the photos I found on the net?
|
|
|
Re: Input selector needed
|
Joined: Mar 2005
Posts: 41
buff
|
OP
buff
Joined: Mar 2005
Posts: 41 |
There is a Video 1 port divided into In and Out sections with yellow (composite) and red and white (audio) plugs. I believe for VCR use.
I assumed they were the same as tape in and out and used the audio portions to output the Sirius signal.
|
|
|
Re: Input selector needed
|
Joined: Dec 2001
Posts: 334 Likes: 5
Axiom Engineer devotee
|
Axiom Engineer devotee
Joined: Dec 2001
Posts: 334 Likes: 5 |
Ok, got it now. What happens if you plug your Sirius directly into the Kenwood? Also, what kind of output do you have on the Sirius unit?
|
|
|
Re: Input selector needed
|
Joined: Mar 2005
Posts: 41
buff
|
OP
buff
Joined: Mar 2005
Posts: 41 |
The Sirius plugs into the Sony with a round plug that has 8 pins inside, similar to an S-video plug. Because it can be controlled through the Sony receiver.
|
|
|
Forums16
Topics24,945
Posts442,481
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
713
guests, and
3
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|