Ken, depending on what stuff you mean, if it's the wire use it bare unless those Parts Express plugs are too cool-looking to resist(of course then you should set up a bit unconventionally, with the backs of the M50s and the 525 facing you!). If it's the crossover of the low frequencies from the 5 channels, set them all small and the cross at 80Hz. If it's the crossover for the LFE channel, the 630 has a separate adjustment for that which the 525 doesn't. I don't follow some of the discussion here on that point, since if all the speaker groups are set identically(e.g. 80Hz)then there should be no difference as to which group the LFE is set to match.
Last edited by JohnK; 05/20/04 12:09 AM.
