Shankar, hello again. When we were discussing subs a couple of years ago I recall that the unusual method that you were going to employ to get it into India made small size a key factor. From that standpoint the PSW10 qualifies, if size is still critical, but depending on how you're actually going to get it, there may be other choices that should be considered. For one thing, the speaker level outputs on the PSW10 are simply a straight-through full-range feed; there's no high-pass filter to roll off the low frequency response from your M3s, so there wouldn't be any advantage in using that type of connection if you have a line level output from your amp available.
If you did make the speaker level connection it would simply feed your 2x50 watt outputs straight through to the M3s and wouldn't affect the internal sub amp in any way other than to feed the audio signals into it. Because of the very high input impedance of the sub amp(in the tens of thousands of ohms)essentially no power from your amplifier would get into the sub amp, just the audio signals. Let us know if you have other possibilities.
Last edited by JohnK; 03/10/06 05:42 AM.
