Thanks for the compliments, guys. And the input. I guess my amp must have a bias to the left channel. I'll take a better picture when I get home tonight so you can see the finish better. The whole thing came from a 4'x8' sheet of MDF, 6 3/4" threaded rods, cut to 30", 2 coats of mahogany stain, and 5 coats of polyurethane on top, with fine sanding done between each coat (2 coats on underside). I used a small routing bit on the edges, and all the side surfaces were very well sanded.
This was my project while I was looking for a job from home, and my dad has some great woodworking tools. Sorry Curtis, I won't be making another one anytime soon, even if I had the tools. It took quite awhile, though it's very satisfying to take on a DIY project. And you have endless options.
Home Theater Forum has a forum dedicated to DIY-type projects.
-Cooper
