Axiom Home Page Forums General Discussion Home Theater Using M3 or M22 as center instead of VP150.

Print Thread

Rate Thread

Re: Using M3 or M22 as center instead of VP150. bugbitten #176653 09/19/07 01:35 AM
Joined: Mar 2007 Posts: 9 S sst OP regular
OP sst regular S Joined: Mar 2007 Posts: 9	If 2 M3s are connected in parallel. Each M3 is an 8 ohm speaker. So the combined load in parallel will be 4 ohms. Is this correct ?

Entire Thread
Subject	Posted By	Posted
Using M3 or M22 as center instead of VP150.	sst	09/16/07 04:47 AM
Re: Using M3 or M22 as center instead of VP150.	JohnK	09/16/07 06:19 AM
Re: Using M3 or M22 as center instead of VP150.	sst	09/16/07 07:21 PM
Re: Using M3 or M22 as center instead of VP150.	Hutzal	09/17/07 01:35 PM
Re: Using M3 or M22 as center instead of VP150.	SoundMan	09/17/07 02:28 PM
Re: Using M3 or M22 as center instead of VP150.	Mojo	09/17/07 02:47 PM
Re: Using M3 or M22 as center instead of VP150.	SoundMan	09/17/07 03:54 PM
Re: Using M3 or M22 as center instead of VP150.	Hutzal	09/17/07 03:43 PM
Re: Using M3 or M22 as center instead of VP150.	sst	09/17/07 05:17 PM
Re: Using M3 or M22 as center instead of VP150.	michael_d	09/17/07 06:40 PM
Re: Using M3 or M22 as center instead of VP150.	bugbitten	09/18/07 02:50 PM
Re: Using M3 or M22 as center instead of VP150.	sst	09/19/07 01:35 AM
Re: Using M3 or M22 as center instead of VP150.	Mojo	09/19/07 01:39 AM
Re: Using M3 or M22 as center instead of VP150.	Hutzal	09/19/07 03:08 PM