I will just add I don't like the way the Yamaha set things up, the avr XO is at 120? Way too high to me, especially if the mains get set to large as well. When you get the next one, set the mains to small and the avr crossover to 80 and adjust the calibration by ear if you have to, then try the Yamaha set up to see what it does to the system.
Jake,
I did exactly that, manually, when the xo is set to 80, I actually had to turn the volume to MAX on the ep350 to get decent bottom end. I get more bottom the higher I set my xo, but the volume just isn't there. If I start to crank the avr volume to louder levels (certainly no where near extreme) the mids and highs start to overpower the EP350. When I reconnect the old JBL and got the bottom end back, then I knew something was wrong with the EP350. No way this cheap JBL should be outperforming a 350.
Dana
