Here is my Pure Power analysis:
Dear Sat Kartar,
Thank you for requesting a power analysis of your system from
PurePower.
Your system can draw a maximum of 2970 watts.
Your system normal draw is approximately 1430 watts.
I recommend our Model 2000 plus a model 700.
Your system has a high potential for current draw depending on your
preferred output levels and component configuration. The Axiom can
draw a max of about 1200 watts and the Denon can draw up to 840 at
full output. Your subs need 150 watts each at full draw. The Plasma
is also a very high draw device which needs 540 watts available full
time.
The normal expected amplifier draw at typical volume levels with your
4 Ohm speaker load is about 1/6th of the maximum potential.
I recommend that you run the amps and subs on our PurePower 2000 and
your plasma and video sources (DVD and HD receivers) on an additional
700 model.
This will give you complete coverage of any potential power
requirement in any situation.
Power Amps and receivers operate at their best when they get the
full current that is needed instantly on demand. The PurePower 2000
is able to provide that full current on demand while maintaining
perfect reference voltage. It should be able to handle your
components with a little headroom to spare.
You can be assured that no utility power glitches will affect the
power generated by the PurePower unit. Our AC is:
- Completely independent of the input supply.
- Supported by our on-line batteries to keep things running
without a hitch. No pops, no clicks, no switching noise.
- The same AC whether the utility is on, off, has dips,
sags or surges.
- Reference power - perfect voltage, perfect sine wave.
- Power you can count on to be a constant in your system.
If you would like any additional information about our PurePower AC
Regenerators, please feel free to email me or visit our web site at
http://www.PurePowerAPS.com.For general sales inquiries, please contact Bob Rapoport at
bob.rapoport@PurePowerAPS.com.
Thanks,
Damian Janzen
PurePower Partners.
