My Marantz SR6003 cannot process the 5.1 192kHz/24bit signal from the BDP-80
It will only show 2 channel at 192kHz/24, playback the 96Khz/24bit version, have no problem with the processing....
Quite a few receivers don't have enough power to both decode the a lossless 192 kHz, multi-channel, Dolby/DTS bitstream and apply processing.
See if you can configure the BDP to ouput LPCM instead of bitstream. Then check to see if the Marantz is still getting 192, and if processing has been re-enabled.
I still stand that BD players should only output LPCM, and do away with bitstreaming.
