Ken,

One thing to note, if you connect the XLR cable to the subwoofer, you will loose about 6db (i think).. I tried using balanced cables with my EP600, and the volume was ALWAYS super low, even when the volume on the sub was turned all of the way up.

Long story short Andrew said that there is a different gain between the RCA connector and XLR, the gain for the XLR is significantly less than the RCA. So, now both of the 600's use RCA's.


So, it might work, but you will loose a LOT of output, due to going with the XLR connection on the axiom amp.

Last edited by dakkon; 07/14/12 10:26 PM.