I made some minor changes to my HT room plus dropped my 2 X Velodyne Subs' Volume to 2.0 from 2.5 - so I re-ran Audyssey today.
Interestingly, while Audyssey set my QS4s & VP100 crossovers to the expected 80Hz, I was surprised to see that my M22s were determined to be 40Hz again. Perhaps they go lower than advertised in my room as I kinda expected 60Hz; however, I manually set them to 80Hz.
The subs at the 2.0 level are now set at -4.0Db vice the -9.2Db where it had been previously. That setting is now closer to the center of Audyssey's correction range.
TAM
