Compensation Chart
As for the sweep generator, I use
the one on this webpage. Make sure you download all the required libraries, though. It's pretty self explanatory, but if you have any questions, feel free to PM me.
A few pointers though:
1. make sure you set it to wide under Frequency Range.
2. Set the output level to -5 or -10 if you don't want any clipping, which would harm your speakers in the higher frequencies (especially if you don't have a good soundcard).
3. Put it on manual mode instead of sweep mode so you can work out kinks in your frequency response one at a time instead of trying to do them all at once.
I hope this helps.
