Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 3 1 2 3
Re: First impressions of my new axiom HT
#110413 09/12/05 06:06 AM
Joined: Sep 2005
Posts: 470
Likes: 11
Rebulx Offline OP
devotee
OP Offline
devotee
Joined: Sep 2005
Posts: 470
Likes: 11
I did what you said and the loud speakers operated normally (no hum). I turned off my receiver and I could still hear the hum. ???

I don't think I am able to reverse the polarity due to the sub plug having a main ground (3 prongs).


Lots of speakers from many
manufactures...mostly Axiom
Re: First impressions of my new axiom HT
#110414 09/12/05 06:24 AM
Joined: Sep 2005
Posts: 470
Likes: 11
Rebulx Offline OP
devotee
OP Offline
devotee
Joined: Sep 2005
Posts: 470
Likes: 11
I turned off the receiver, still humming, and then unplugged it. The humming stopped for about 3 seconds and then started back up. I unplugged all the other components which gave negative results. I unplugged the sub and plugged it into another outlet and the hum was 10x louder!!! I need help Would a power conditioner help or power strip???


Lots of speakers from many
manufactures...mostly Axiom
Re: First impressions of my new axiom HT
#110415 09/12/05 06:30 AM
Joined: May 2002
Posts: 10,654
shareholder in the making
Offline
shareholder in the making
Joined: May 2002
Posts: 10,654
Okay, then the problem isn't a ground loop, because that would also affect the other speakers, and the problem isn't reversed polarity because the three-prong plugs can only be connected with the correct polarity. If you're using a reasonably well-shielded coaxial cable to the sub, that shouldn't be picking up significant hum unless you have it right alongside a power cord(move the cable around to see if it makes any difference). Checking with Axiom might get some useful suggestions.


-----------------------------------

Enjoy the music, not the equipment.


Re: First impressions of my new axiom HT
#110416 09/12/05 04:28 PM
Joined: Jan 2005
Posts: 2,034
connoisseur
Offline
connoisseur
Joined: Jan 2005
Posts: 2,034
Is it worth the upgrade from M50s to M60s?

I dunno.....I have the M50s and couldn't be happier with them. I started with the M3s way back when, and when it was time to go with larger floorstanders in a larger room, it was a simple choice to go with the M50s.

Simple? Yeah, right....

I agonized over that one for months

In the end I went with the M50s only cause I knew exactly what the M3s sounded like and knew that I wanted something that sounded as close as reasonable to them.

Compared to the M50s; the M60s should sound a little more foreward, have a bit more midrange accuracy, be a little less forgiving of poorly recorded material, and perhaps be a little less pleasant in harsher environments.

You trade a little comfort for a little performance.




Re: First impressions of my new axiom HT
#110417 09/12/05 08:57 PM
Joined: Aug 2004
Posts: 6,379
Likes: 7
axiomite
Offline
axiomite
Joined: Aug 2004
Posts: 6,379
Likes: 7
I own M60s but based on my experience with M40s and M3s I would probably be just as happy with M50s. The difference between M60 and M3 (yes, M3 not M50) is surprisingly small except for the deep bass and the difference between M50 and M60 would be even smaller...

Here are my notes from comparing M3s with other Axiom speakers. Read down to the end to get M3 vs. M60... I sure was surprised :

http://www.axiomaudio.com/boards/showflat.php?Cat=&Board=ST&Number=86248&page=&view=&sb=&o=&vc=1

I have not heard 50 vs. 60 but I would expect the following differences :

1. When playing loud music with lots of bass, the midrange would retain clarity at higher volumes on the 60 because of the dedicated midrange driver.

2. The M60 would be a tiny bit more "forward" than the M50 because the off-axis upper midrange response on the M50 isn't quite as good as the M60.


Last edited by bridgman; 09/12/05 09:00 PM.

M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39
M5HP, M40ti, Sierra-1
LFR1100 active, ADA1500-4 and -8
Re: First impressions of my new axiom HT
#110418 09/12/05 10:22 PM
Joined: Jan 2005
Posts: 2,034
connoisseur
Offline
connoisseur
Joined: Jan 2005
Posts: 2,034
Can't believe that thread came out as long ago as March!

That thread deserves to be placed squarely within the "Reviews" section of this web site for all to read at any timeIt does a great job of placing each Axiom speaker within the range of all Axiom speakers

Thanx for bringing it back to our attention

Re: First impressions of my new axiom HT
#110419 09/13/05 07:09 AM
Joined: Sep 2005
Posts: 470
Likes: 11
Rebulx Offline OP
devotee
OP Offline
devotee
Joined: Sep 2005
Posts: 470
Likes: 11
Hum fixed! I bought a glorified surge protector. It allowed the cable to go through the surge.

When I unplugged the cable from the cable box the hum got alot louder; however, when I ran the cable through the surge protector the hum went away!!! All is good now!


Lots of speakers from many
manufactures...mostly Axiom
Re: First impressions of my new axiom HT
#110420 09/13/05 01:09 PM
Joined: Aug 2004
Posts: 6,379
Likes: 7
axiomite
Offline
axiomite
Joined: Aug 2004
Posts: 6,379
Likes: 7
Now that is odd... but I'm glad you got it fixed.

Folks, what did we learn from this ? I'm a bit confused myself...


M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39
M5HP, M40ti, Sierra-1
LFR1100 active, ADA1500-4 and -8
Re: First impressions of my new axiom HT
#110421 09/13/05 04:32 PM
Joined: Jun 2005
Posts: 1,189
connoisseur
Offline
connoisseur
Joined: Jun 2005
Posts: 1,189
So the hum was a ground loop problem coming through the cable feed, and entering the sub thru the power connection. The cable tuner transfered the hum from the cable feed back into the electrical system?


-Dave

M80s VP150 QS8s EP500s
ravenmanor.com/cinema/
Re: First impressions of my new axiom HT
#110422 09/13/05 04:54 PM
Joined: Jan 2002
Posts: 3,270
connoisseur
Offline
connoisseur
Joined: Jan 2002
Posts: 3,270
Hi rebulx,

Just a couple of specific questions, so I can add your experience to my list of "ground-loop fixes".
So when you refer to the "the cable", do you mean the TV-cable feed to your outboard cable-TV tuner set-top box? And did you feed the cable-TV to the surge protector, then to the Cable-TV box?

And which cable did you unplug from the cable box when the hum got louder? I'm trying to get this straight in my mind.

Regards,


Alan Lofft,
Axiom Resident Expert (Retired)
Page 2 of 3 1 2 3

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,945
Posts442,482
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
1 members (Hambrabi), 999 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4