Previous Thread
Next Thread
Print Thread
Rate Thread
Page 3 of 5 1 2 3 4 5
Re: Man, I hope my picture tube didn't just go out???
SirQuack #168910 09/10/07 12:54 PM
Joined: Dec 2003
Posts: 725
HAY Offline
aficionado
Offline
aficionado
Joined: Dec 2003
Posts: 725
Quote:

When I unplugged the component cables that I had hooked up to the back of the Toshiba tv, I managed to pull out these little clip ends that were on the tv component terminals.




I had the same thing happen with my older 27" Toshiba tube tv as well. I was able to push them back in and use the TV. As it was still under warranty I had them replace the terminals.

Good luck


High Gloss Cherry
M60 VP150 QS8
Open for Auditions but please don't drool on the High Gloss
Re: Man, I hope my picture tube didn't just go out???
Mojo #168911 09/10/07 01:39 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Well they are an authorized Toshiba service center, so I would assume they would do accurate workmanship. I will check to see how long their work is covered and if I can get a guarantee/warranty on this new work.

Thanks, Randy


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Man, I hope my picture tube didn't just go out???
HAY #168912 09/10/07 01:40 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Thanks Hay,

I have had this same problem with Radio Shack gold cables on my Denon receiver, they are so darn hard to push on and I'm always worried about pulling them off, sure takes some effort.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Man, I hope my picture tube didn't just go out???
SirQuack #168913 09/10/07 03:46 PM
Joined: Sep 2004
Posts: 11,458
shareholder in the making
Offline
shareholder in the making
Joined: Sep 2004
Posts: 11,458
I always twist on and off.....


::::::: No disrespect to Axiom, but my favorite woofer is my yellow lab :::::::
Re: Man, I hope my picture tube didn't just go out???
MarkSJohnson #168914 10/03/07 10:31 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
A frustrating follow up.... Well, a few weeks back as you know I heard back the the flyback transformer needed to be replaced. I talked to the technician working on my tv and he said they have replaced hundreds of these through the years on various tv sets.

He said it would cost about $280 plus tax including labor and would take a few weeks to get the parts ordered.

Now this is where I get pi$$ed. Got home tonight and there was a message from the same guy that Toshiba says the parts are not available anymore. He wants to know if I want it back or have them dispose of the tv.

This tv was purchased brand new from American Electronics and Furniture about 3-4 yrs ago. We payed about $1500 after talking the salesman down. It is a nice 32" flat screen tube HDTV ready tv that had a great picture when hooked to my OTA HD tuner.

Now they say it is not available to be fixed, what the heck. Your telling me parts are only kept for 4 years after manufactured date?


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Man, I hope my picture tube didn't just go out
SirQuack #168915 10/03/07 10:44 PM
Joined: Jul 2006
Posts: 2,102
connoisseur
Offline
connoisseur
Joined: Jul 2006
Posts: 2,102
Contact Toshiba yourself and ask them what you should do. For all you know, this guy may have not done anything, and is just lazy.


Producer | Composer
www.robbhutzal.com
Re: Man, I hope my picture tube didn't just go out
Hutzal #168916 10/03/07 11:13 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Just called them, they said parts are only kept for 5 years. This model was mfg'd in 2001. I was thinking it had only been 4 yrs, but looks like we purchased it in march 2002. So I guess we are $hit out of luck.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Man, I hope my picture tube didn't just go out
SirQuack #168917 10/04/07 01:05 AM
Joined: Jan 2007
Posts: 10,490
Likes: 116
M
shareholder in the making
Offline
shareholder in the making
M
Joined: Jan 2007
Posts: 10,490
Likes: 116
Randy,

You can find out the part number of the flyback and then do a search on the net for places that may carry it.

Re: Man, I hope my picture tube didn't just go out
Mojo #168918 10/04/07 01:21 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
OP Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
So your saying that if Toshiba stopped providing this part in 2006 and no longer have inventory, someone else will have it? My guess refurbished?

Even if I could find it, who is going to install it for me? I'm technical and can build servers and computers, but this most likely would be out of my experience.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Man, I hope my picture tube didn't just go out
SirQuack #168919 10/04/07 01:29 AM
Joined: Jan 2007
Posts: 10,490
Likes: 116
M
shareholder in the making
Offline
shareholder in the making
M
Joined: Jan 2007
Posts: 10,490
Likes: 116
Yes to your first question.

You could take it to the TV repair man who wants to feed your set to the garbage bin.

Page 3 of 5 1 2 3 4 5

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,945
Posts442,479
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 1,034 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4