Using thin flat speaker wires?
|
Joined: Jan 2008
Posts: 10
frequent flier
|
OP
frequent flier
Joined: Jan 2008
Posts: 10 |
I have a dilemma with mounting my rear speakers and having to hide the wires by using thin flat wires and paint over them. Have anyone used thin flat speaker wires? How does it look? Any issues?
|
|
|
Re: Using thin flat speaker wires?
|
Joined: Jan 2004
Posts: 13,849 Likes: 15
shareholder in the making
|
shareholder in the making
Joined: Jan 2004
Posts: 13,849 Likes: 15 |
I assume your talking about the new Axiom flat wires? They should work just fine technically as 12 gauge is 12 gauge. I think if you paint over them they would be hardly noticable.
From the product page.
2. Axiom Flat Wire can be painted, spackled & painted, layed under carpet, under floor tiles & even wallpapered over.
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: Using thin flat speaker wires?
|
Joined: Mar 2004
Posts: 1,056
connoisseur
|
connoisseur
Joined: Mar 2004
Posts: 1,056 |
I used the flat wire in a previous install. THe wire is about as thick as a business card. So, while very, very, thin, it is still visible on the wall, on close inspection, even with a thick cost of paint on it.
However, a coat of spackle fixes that problem. The key, of course, is getting a nice blend from back into the wall. Sanding is necessary to get the spackle to blend smoothly. A cost of paint - and bingo, the wire literally disappears.
Not to c*ck block axiom, but the flat wire can be obtained for much cheaper than they sell it here. A google search should fix you right up. Nowadays, there are more than one company competing to sell the stuff, which is good.
Also, the "coupling" accessories that let you connect flat wire to regular round wire are a bit unnecessary, if you ask me. The flat wire can be crimped with a pair of needle nose pliers and stuffed right into the binding post or banana plug, or spade, etc.
What I did to save a little cash was to run regular round wire along the baseboard underneath a wire track placed just above the baseboard - which provided a nicely unobtrusive seem that looked very much just like an added bit on the baseboard. Many of the guests didn't realize that the wire track was even there. Then, at the wall base (mine was conveniently hidden by a couch, which meant a clean transition from teh baseboard to the wall was not as important), I simply crimped and electrical taped the round wire to the flat wire.
The look was that of in-wall wiring, without the added cost of tearing down dry-wall. Total installation time took about a days to do it right (including drying times).
Good luck.
|
|
|
Re: Using thin flat speaker wires?
|
Joined: May 2003
Posts: 18,044
shareholder in the making
|
shareholder in the making
Joined: May 2003
Posts: 18,044 |
I use semi-flat wiring for my surrounds. I originally received (through an accident at the dealer) flat wire similar to what Axiom sells, although smaller gauge. It did not work for my application (I didn't like the adhesive, and it didn't look good on my wall), but again, I haven't tried Axiom's. The cable I have is 16 gauge, stranded, but it's molded into a flatter cable than standard speaker wire. Works just fine.
I am the Doctor, and THIS... is my SPOON!
|
|
|
Re: Using thin flat speaker wires?
|
Joined: Apr 2007
Posts: 4,877
connoisseur
|
connoisseur
Joined: Apr 2007
Posts: 4,877 |
I would use drywall 'mud' instead of shrink free spackle. Much cheaper, and works equally as good. YOu have to let it dry for a day or so before you sand it and paint it though.
-David
|
|
|
Re: Using thin flat speaker wires?
|
Joined: Jan 2008
Posts: 10
frequent flier
|
OP
frequent flier
Joined: Jan 2008
Posts: 10 |
Appreciate all your comments. Thanks everyone
|
|
|
Forums16
Topics24,984
Posts442,691
Members15,643
|
Most Online2,699 Aug 8th, 2024
|
|
0 members (),
595
guests, and
0
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|