Re: EP350v2 versus EP350v3 specs
|
Joined: Jan 2004
Posts: 13,840 Likes: 13
shareholder in the making
|
OP
shareholder in the making
Joined: Jan 2004
Posts: 13,840 Likes: 13 |
Yeah, but I have two on order, not just one. ????
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: EP350v2 versus EP350v3 specs
|
Joined: Jan 2004
Posts: 13,840 Likes: 13
shareholder in the making
|
OP
shareholder in the making
Joined: Jan 2004
Posts: 13,840 Likes: 13 |
Unboxing these beasts now, they are awesome looking in custom Ebony Pica.
Anyway, for the other folks that have the new 350v3, did the box say "EP350v3 200 watts" on the side? I thought these were bumped up to 300 watts, according to the specs on the product page?
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: EP350v2 versus EP350v3 specs
|
Joined: Oct 2007
Posts: 395
devotee
|
devotee
Joined: Oct 2007
Posts: 395 |
Yeah, I brought that up in the "... now shipping" thread . I think we just attributed that to the fact that the boxes were ordered before the final stats were known. Or a mistake in printing.
|
|
|
Re: EP350v2 versus EP350v3 specs
|
Joined: Jan 2004
Posts: 13,840 Likes: 13
shareholder in the making
|
OP
shareholder in the making
Joined: Jan 2004
Posts: 13,840 Likes: 13 |
I've got them hooked up and trying to run my receiver calibration to balance everything. One of them as nothing coming out the driver. STarting my troubleshooting, hope it is something simple like a cable that came loose...
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: EP350v2 versus EP350v3 specs
|
Joined: Jan 2004
Posts: 13,840 Likes: 13
shareholder in the making
|
OP
shareholder in the making
Joined: Jan 2004
Posts: 13,840 Likes: 13 |
gotter done, the black wire for one of the drivers was not even hooked up, all is well and the rumbling as begun.
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: EP350v2 versus EP350v3 specs
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
24 hrs later and still no initial thoughts? hmmmmm......must be having too much fun setting things up.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Re: EP350v2 versus EP350v3 specs
|
Joined: Jan 2004
Posts: 13,840 Likes: 13
shareholder in the making
|
OP
shareholder in the making
Joined: Jan 2004
Posts: 13,840 Likes: 13 |
I've been spending a lot of time trying to get everything calibrated. My initial plan was to use the Velodyne SMS-1 to adjust the 350's and let the 600 just go through the receiver. The freq response was very smooth with no EQ. The problem was when I tried to adjust down some of the peaks using the sms-1(which generally is very easy to do) they actually got higher. I think it has something to do with interactions from having multiple subs and all the waves bouncig/colliding with each other.
I'm tossing around the idea of using the SMS-1 to find the best placement for my subs and then sell it.
My main problem is trying to calibrate SPL with the meter. I calibrated them all to 75dB's individually, but when they are all on, the dB's jump by about 9 dB's. Maybe I'm supposed to calibrate them lower so the sum gets me back to match the other speakers.
The 600 is crazy, I have to have the volume on the 600 at the lowest MIN setting and my Denon at -5dB and it is still higher than 75dB's on the meter, that is crazy. Because of this I have to really turn up the gain on the 350's, since the Denon is at -5dB. arggggggg
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: EP350v2 versus EP350v3 specs
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
The joy of mismatched subs
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Re: EP350v2 versus EP350v3 specs
|
Joined: Jan 2004
Posts: 13,840 Likes: 13
shareholder in the making
|
OP
shareholder in the making
Joined: Jan 2004
Posts: 13,840 Likes: 13 |
Not sure that is it, I talked to Ian and Jakeman. Both said the 350v3s would match well to the 600. I think part of the problem is my Denon 2805. I know Alan and other say to put it at 0 for the sub level and then adjust up/down form the sub. There is no way I can do that with the 600. I would be hitting 90dB's with the receiver pink noise.
I think mojo has to run his Denon at -9. The subs sound awesome togethor, I'm just trying to figure out the best way to calibrate them all.
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: EP350v2 versus EP350v3 specs
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
I think I might try to set the 600 to where you wnat and then bring the 350's up to match it.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Forums16
Topics24,945
Posts442,489
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
1,092
guests, and
2
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|