|
Re: Surround wiring issue
|
Joined: Jun 2005
Posts: 1,189
connoisseur
|
connoisseur
Joined: Jun 2005
Posts: 1,189 |
LOL! Good point Peter.
|
|
|
Lengthy...but worked for me.
|
Joined: Jun 2006
Posts: 13
frequent flier
|
frequent flier
Joined: Jun 2006
Posts: 13 |
I feel your pain. I had the same problem. I drilled a 1 inch hole in the bottom of the wall and used a "fish tape" to push the wire to the corner of the room. (Use a drill bit that cut holes...do not use small drill bits to "make a hole" and keep the plugs of drywall, you will need them) I then drilled another 1 inch hole in the adjoining wall so that I could pull the wires around the corner. I used the fish tape to run both pair of of wires to the back of the room and did the same thing again to get past the corner. When I got to the location on the wall where I wanted the first speaker, I drilled hole in the proposed speaker location and pulled the wire through. I then used the fish tape to move the other speaker wire to the desired location. Here's the catch: you need to have a wall that is continuous i.e. without a doorway and it requires a significant amount of speker wire to do it that way. You will have to precut the wire and I would recommend making sure that the lengths are prettly close to being the same for both pair.
After you are done...you will have holes in your wall...take each of the drywall plugs and drill a small hole in the middle..stick a nail through the back side that is is about an inch or so longer than the drywall is thick...put a plug in a hole so that the head of the nail is in the wall and the point is facing you, hold onto the nail and spackle the area around the plug...it..after the spackle is dry..just push the nail into the plug and paint.
It is worth the work if you don't want to see wires.
|
|
|
Re: Lengthy...but worked for me.
|
Joined: Apr 2007
Posts: 4,877
connoisseur
|
connoisseur
Joined: Apr 2007
Posts: 4,877 |
-David
|
|
|
Re: Lengthy...but worked for me.
|
Joined: Apr 2003
Posts: 16,441
shareholder in the making
|
shareholder in the making
Joined: Apr 2003
Posts: 16,441 |
How did you get the wires through studs?
|
|
|
Re: Lengthy...but worked for me.
|
Joined: Jul 2008
Posts: 52
buff
|
buff
Joined: Jul 2008
Posts: 52 |
How did you get the wires through studs? I was wondering the same thing. Posts like these make me grateful that I was able to lay out my system while construction was going on. Pre-wired for 7.1 (even ran coax to a couple of different locations for subs) and 2000' of cat5. Weeks of planning and one incredibly long weekend of drilling and labeling.
Last edited by Lohengrin; 07/17/08 11:04 PM. Reason: spelling misteaks
|
|
|
Re: Lengthy...but worked for me.
|
Joined: Jun 2006
Posts: 13
frequent flier
|
frequent flier
Joined: Jun 2006
Posts: 13 |
The walls that I had to fish the wires through were outside walls which meant that the back of the studs were not attached to drywall.
|
|
|
Forums16
Topics24,949
Posts442,517
Members15,620
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
367
guests, and
0
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|