Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 8 1 2 3 4 5 6 7 8
Re: Does anyone here have any experience with Emotiva?
Micah #232108 11/29/08 07:36 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
The Denon BR players do play SACD and DVD-A, at least the really expensive one does.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Does anyone here have any experience with Emotiva?
Micah #232111 11/29/08 08:30 PM
Joined: Mar 2005
Posts: 340
devotee
Offline
devotee
Joined: Mar 2005
Posts: 340
Here is my 2 cents. I have M60s, VP150 and QS8s so I can't comment on the 4 ohm M80s. I have owned 3 pieces of Emotiva gear. An LPA-1 amp, LMC-1 processor and an XPA-5 amp. I have enjoyed all 3 pieces and have never had an issue with them running hot or shutting down. I have had to send in the LPA (which I have since sold) and the LMC for repair but will say that their service has been similar to Axiom's at least for me. It was quick and so far there have not been any more needed repairs. The XPA-5 works great with the 60s. Personally I like the gear but I'm not 100% sure with the quality yet. The XPA has been flawless but I've only had it about 9 months. They have a 5 year warranty so they do stand behind their products.

All in all, I am positive for Emotiva and plan on purchasing more pieces when they are released.

Re: Does anyone here have any experience with Emotiva?
cgolf #232116 11/29/08 10:30 PM
Joined: Nov 2008
Posts: 1,789
Micah Offline OP
connoisseur
OP Offline
connoisseur
Joined: Nov 2008
Posts: 1,789
Well I was looking at the Denon DVD-1800BD which I found online for $500 bucks. Not cheap, but not out of this world either. But reading the description it says "brings you True HD & SACD via HDMI... I wonder if that means no RCA analog outs?


My Stuff :

M80's
QS8's
VP150
EP800
Denon 4802
Emotiva XPA-3
Samsung BD-P3600
Sharp 65 Inch Aquos LCD
Re: Does anyone here have any experience with Emotiva?
Micah #232118 11/29/08 11:17 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Actually SACD is not even supported on the 1800BD only the standard cd layer is read.

"....only the sound on the cd layer can be heard..." right from the 1800BD owners manual.

Continued through all the BR Denon owner's manuals and none of them appear to support SACD nor DVD-A. \:\(

Last edited by jakewash; 11/29/08 11:22 PM. Reason: added content

Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
YES YES YES.....
jakewash #232156 11/30/08 02:40 AM
Joined: Jan 2008
Posts: 175
veteran
Offline
veteran
Joined: Jan 2008
Posts: 175
I run my m80's vp150, and qs8' with a mmc1 pre/pro and the xpa5.. I have stated this many times, but just to sum it up Emotiva makes great products! the xpa5 is incredible. Especially if you run just the mains(m80's) in stereo wich is stated at 450 wpc the sound is so sweet! The mmc1 is no longer available but it is a very nice processor. the new processors coming out are supposed to be amazing, and i get the 40% off discount

I am hoping the new dual subs from emotiva are on my christmas list \:\)

They are a great internet company just like axiom... if you have any questions just give them a call.

Re: YES YES YES.....
turbo16v #232165 11/30/08 06:14 AM
Joined: Sep 2008
Posts: 612
aficionado
Offline
aficionado
Joined: Sep 2008
Posts: 612
Yes emotiva products do sound good, I could never figure out why the XPA2 would not drive my M80s without going into protect when a number of folks here on the forum have used the XPA5 with no problem.


"If you try to turn toward it, you go against it."
Re: YES YES YES.....
SatKartr #232168 11/30/08 10:12 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
I can't seem to find it, but I read some where that the XPA-5 has a different protection circuitry than the XPA-2 and I think this difference might be the cause of the XPA-2 shut down.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: YES YES YES.....
jakewash #232171 11/30/08 12:32 PM
Joined: Jun 2003
Posts: 6,833
W
Wid Offline
axiomite
Offline
axiomite
W
Joined: Jun 2003
Posts: 6,833

I wouldn't take my chances on it, if it were the M60s maybe. They do make a fine looking product. I would like to see someone try to drive a set of Maggies with one of these amps.


Rick


"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

Re: YES YES YES.....
Wid #232182 11/30/08 03:01 PM
Joined: Jan 2004
Posts: 13,849
Likes: 15
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,849
Likes: 15
Not 100% sure, but I believe the XPA2 has the same waveform limiter circuitry as the MPS1, so that would make sense why it does not like to drive 4ohm speakers.

Since I sent back my MPS1 and purchased my Odyssey monoblocks the 80's have never been more happy. \:\)


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Does anyone here have any experience with Emotiva?
jakewash #232212 11/30/08 09:00 PM
Joined: Nov 2008
Posts: 1,789
Micah Offline OP
connoisseur
OP Offline
connoisseur
Joined: Nov 2008
Posts: 1,789
 Originally Posted By: jakewash
Actually SACD is not even supported on the 1800BD only the standard cd layer is read.

"....only the sound on the cd layer can be heard..." right from the 1800BD owners manual.

Continued through all the BR Denon owner's manuals and none of them appear to support SACD nor DVD-A. \:\(



Hmmm.... I must have been in 'wish' mode when I wrote that. For some reason I thought it mentioned SACD, but upon second look you're right. So I wonder if, since my reciever only has the one set of RCS external imputs, if 'Y' adapters would work? The extra connection may degrade the sound ever so slightly, but it would save having to unplug the BluRay player everytime I wanted to listen to SACD.

Perhaps I'll be able to post in the future about whether or not the XPA-5 will run a pair of M80's. I think I'm going to follow the advice of several members here and try running my system with just my Denon and see how it handles everything. I'm sure for movies it will do the job brilliantly. I'm more concerned with the way it will play music at high levels for prolonged periods of time. If it's not up to the task then I'll more than likely be purchasing the XPA-5 (now that I understand resistance a little bit better) and running my front left, front right, center, surround left and surround right speakers through the Emotiva, and run my remaining four surrounds through the 4802. This way I should be able to get away with purchasing four QS4 v2's for the rear and the QS8 v2's for the side surrounds. I'd save $220 bucks that way, which is a third of the cost of the XPA-5!


My Stuff :

M80's
QS8's
VP150
EP800
Denon 4802
Emotiva XPA-3
Samsung BD-P3600
Sharp 65 Inch Aquos LCD
Page 2 of 8 1 2 3 4 5 6 7 8

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,984
Posts442,691
Members15,643
Most Online2,699
Aug 8th, 2024
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,849
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 595 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4