Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 5 1 2 3 4 5
Re: custom vinyl
Zimm #249710 03/02/09 12:09 AM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
That could be true, although most of the MDF I've seen in the box stores (either 1" or 3/4" x 4' x 8') seem to have an extremely smooth surface on them. It would need to be sealed with a fast drying primer of some kind to seal it first though, because MDF is like a really hard sponge, it soaks up a lot of paint unless it's sealed properly.


Half of communication is listening. You can't listen with your mouth.
Re: custom vinyl
Adrian #249714 03/02/09 12:23 AM
Joined: Feb 2009
Posts: 44
D
buff
OP Offline
buff
D
Joined: Feb 2009
Posts: 44
Covering up the wood grain would suck. Maybe ill just go with a lightly stained pine or oak. i just want a nice contrast between the furniture and speakers.

Re: custom vinyl
deathjester #249717 03/02/09 01:12 AM
Joined: Feb 2004
Posts: 309
devotee
Offline
devotee
Joined: Feb 2004
Posts: 309
You could just go with a basic vinyl finish and paint it any color you want. All you need to do is scuff it up a bit with some 220 grit sandpaper and spray paint it with a good enamel paint.


I started out with nothing & I've still got most of it left
M60 VP160 QS8 EP350
M22 VP100
Algonquins
Re: custom vinyl
Joe_in_SC #249718 03/02/09 01:17 AM
Joined: Dec 2008
Posts: 1,361
connoisseur
Offline
connoisseur
Joined: Dec 2008
Posts: 1,361
To come full circle, if they have the color you want in vinyl I don't see why they could not do high gloss on it.


Panny 3000 PJ, 118" Carada, Denon 3300, PS3, Axiom QS8, PSB 5T, B&W sub, levitating speaker wire
Re: custom vinyl
Joe_in_SC #249725 03/02/09 01:53 AM
Joined: Feb 2009
Posts: 22
G
hobbyist
Offline
hobbyist
G
Joined: Feb 2009
Posts: 22
 Originally Posted By: Joe_in_Ct
You could just go with a basic vinyl finish and paint it any color you want. All you need to do is scuff it up a bit with some 220 grit sandpaper and spray paint it with a good enamel paint.


Joe are you serious? Who in their right mind would buy a new set of nice speakers and then put sandpaper to the vinyl covering(?) then paint them?

Brotha, that's crazy talk right there.

Re: custom vinyl
Ghostmech #249727 03/02/09 02:02 AM
Joined: Feb 2009
Posts: 44
D
buff
OP Offline
buff
D
Joined: Feb 2009
Posts: 44
Im actually liking the natural maple thats shown in the gallery. With semi gloss it would work out cheaper then high gloss white anyway.

Re: custom vinyl
Ghostmech #249730 03/02/09 02:09 AM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
What Joe said, could actually work if you chose one of the base finishes(Boston Ch, Black etc) because this vinyl comes already bonded to the sheets of MDF that Axiom uses, if I'm correct. If someone really wanted another colour, you could spray paint over top of this as long as the surface was lightly sanded to help the paint adhere better. It is a lot of bother to go through, but that's up to the individual to decide if that's something they want to do. Might be better to ask Axiom a few questions, maybe they can suggest something.


Half of communication is listening. You can't listen with your mouth.
Re: custom vinyl
deathjester #249731 03/02/09 02:10 AM
Joined: Apr 2003
Posts: 16,441
shareholder in the making
Offline
shareholder in the making
Joined: Apr 2003
Posts: 16,441
You can order finish samples from Axiom prior to ordering if you're not quite sure what you want.

Re: custom vinyl
Ken.C #249732 03/02/09 02:10 AM
Joined: Sep 2002
Posts: 1,488
connoisseur
Offline
connoisseur
Joined: Sep 2002
Posts: 1,488
 Originally Posted By: kcarlile
Oh, I'm talking about getting HG white or piano black in the VaSSallo shop. Or the orange or blue audiobytes, for that matter. Which are just plain awesome. ;\)


These finishes arent done over a veneer. Its straight onto the MDF. Its also pretty easy (relative to something such as plywood) to get a good finish like this over MDF because it is already very smooth and there are no natural deviations to the surface such as with a real wood. The HG white is simply like a white piano finish. The speakers look pretty slick in HG white but its definetly not a look for everyone. or every decor.

Last edited by Haoleb; 03/02/09 02:13 AM.
Re: custom vinyl
Ghostmech #249736 03/02/09 02:15 AM
Joined: Dec 2008
Posts: 1,361
connoisseur
Offline
connoisseur
Joined: Dec 2008
Posts: 1,361
Well, funny story, i just did that. But my PSB towers are a little long in the tooth and i was tired of the black ash vinyl finish. I veneered the B&W sub as well, and its teeth were not so old. Now they are piano black and hand-rubbed mahogany real wood veneer. I like them much better now and the WAF went way up. So, in short, it can be done. But you better plan ahead.
Sanding and painting perfectly good speakers


Panny 3000 PJ, 118" Carada, Denon 3300, PS3, Axiom QS8, PSB 5T, B&W sub, levitating speaker wire
Page 2 of 5 1 2 3 4 5

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,984
Posts442,691
Members15,643
Most Online2,699
Aug 8th, 2024
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,849
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 595 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4