Re: onkyo m282 and m80
|
Joined: Feb 2004
Posts: 537
aficionado
|
aficionado
Joined: Feb 2004
Posts: 537 |
There's always Audiogon if you are comfortable with it. I have purchased a few things on there and it's worked out all right. You can get a 3 channel Acurus for $425 US. Of course you would have to get them to ship it to you. Acurus A200X3 There's also an A250 (2 channel) on Canuck audio Mart. Acurus A250
2xM80 VP180 2xQS8 2xM3 HSU STF3 LG 60PS11 Denon 3808 ATI 1506 LCR 2xATI 1502 Oppo BDP-83
|
|
|
Re: onkyo m282 and m80
|
Joined: Apr 2003
Posts: 16,441
shareholder in the making
|
shareholder in the making
Joined: Apr 2003
Posts: 16,441 |
I read your posts with the voice of Skipper.
|
|
|
Re: onkyo m282 and m80
|
Joined: Aug 2004
Posts: 313
devotee
|
OP
devotee
Joined: Aug 2004
Posts: 313 |
230W is quite possibly in the range you are able to get out of the Pioneer give or take a few watts, at least that is what I can get out of my 3808, so I am looking for double that, 500W, for an outboard amp.
You could look for a cheap mono amp to drive the center or even use that one you linked to in bridged mode. I doubt it, my pio is rated around 110w/channel for 20hz-20khz. This is a vendor info and can't find the real output that the AVR is capable for an indefinite time range. This could be a peak rating.
|
|
|
Re: onkyo m282 and m80
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
110 into 8ohms equates out to about 170W into 4ohms providing that spec isn't peak. The difference from 170 to 230 would be about 1-2 db, barely noticeable at all. This is why I look at a doubling of the 8ohm spec to really gain any improvement. So you would need an amp with 220W into 8 ohms this would give you ~300W into the M80s, a noticeable SPL increase and lots of headroom for them at lower volumes.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Re: onkyo m282 and m80
|
Joined: Aug 2004
Posts: 313
devotee
|
OP
devotee
Joined: Aug 2004
Posts: 313 |
110 into 8ohms equates out to about 170W into 4ohms providing that spec isn't peak. The difference from 170 to 230 would be about 1-2 db, barely noticeable at all. This is why I look at a doubling of the 8ohm spec to really gain any improvement. So you would need an amp with 220W into 8 ohms this would give you ~300W into the M80s, a noticeable SPL increase and lots of headroom for them at lower volumes. the emo xpa3 will (at 539US) will cost me 975$CDN shipped to my door. Cost of Product: 539$ Duties: 8% 43.12 Brokerage Fees: 33 Subtotal: 615.12 GST:5% 30.76 PST: 7.5% 46.13 Freight: 94 Subtotal:170.89 Total: 786.01$ US CDN: 973$CDN A Behringer ep2500 is 440$CDN for a 2 ch. So 440x2 (two amps) = 880$ +taxes + shipping + 4x RCA to XLR cables since the signal is going from unbalanced to balanced XLR, there is a good chance of signal noises which requires an external device. I'm always back to square one on this.. The Behringer A500 looked like a compromise but it looks unreliable from the hundred of posts I gathered..
|
|
|
Re: onkyo m282 and m80
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
The Crown, as far as I can tell has good reviews.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Re: onkyo m282 and m80
|
Joined: Aug 2004
Posts: 313
devotee
|
OP
devotee
Joined: Aug 2004
Posts: 313 |
The Crown, as far as I can tell has good reviews. you still need rca to xlr + a external box to convert unbalanced to balanced signal, otherwise you'll be dealing with noise.
|
|
|
Re: onkyo m282 and m80
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
There seems to be a number of people simply running the amp with the adapters and no noise.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Re: onkyo m282 and m80
|
Joined: Jun 2003
Posts: 8,488 Likes: 1
axiomite
|
axiomite
Joined: Jun 2003
Posts: 8,488 Likes: 1 |
Are the fans audible on those types of amps?
bibere usque ad hilaritatem
|
|
|
Re: onkyo m282 and m80
|
Joined: Oct 2007
Posts: 395
devotee
|
devotee
Joined: Oct 2007
Posts: 395 |
The A1400 is only balanced, isn't it? What are people using with those?
M80s/VP160/QS8s/EP350; M22s; M3s.
|
|
|
Forums16
Topics24,949
Posts442,512
Members15,619
|
Most Online2,082 Jan 22nd, 2020
|
|
2 members (RickF, BBIBH),
684
guests, and
2
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|