Previous Thread
Next Thread
Print Thread
Rate Thread
Page 3 of 8 1 2 3 4 5 6 7 8
Re: Dishwasher
oldskoolboarder #293355 02/22/10 05:15 PM
Joined: Dec 2003
Posts: 10,420
shareholder in the making
Offline
shareholder in the making
Joined: Dec 2003
Posts: 10,420
Hmmm, no problems with either one of our Miele dishwashers both work great, although the first one did work a little better due to it's built in water softener. 2hrs for washing dishes, no problem for me. I usually forget it is on and am in no hurry to have them washed right away either, but if I was, I would use the quick cycle which is about the same as most other dishwashers.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Dishwasher
Wid #401898 03/14/14 09:30 PM
Joined: Jun 2003
Posts: 8,488
T
axiomite
Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
I'M BACK.

Well, the f*$king Kitchenaid has just about had it. Good riddance, you miserable POS.

I thought it was a nice unit, but it's been uncool for a while. I've had to fix the load spring thing (the doodad that makes it not seem like the door weighs 50 pounds) twice. Once, I did it, and then had it done. Had to remove the gasket around the soap dispenser so that it would close properly. Had to dissemble, clean and reassemble all the water squirty parts a couple of times (we actually have very SOFT water, so this makes no sense to me), bought one new silverware basket because the old one melted, and patched the new basket because it melted, too. I KNOW there are a couple other things in there, too, but I can't remember off the top of my head what they were.

Now, it doesn't reliably drain and the heater element seems to not work.

So, that SOB is going buh-bye.

Any new wisdom in the last four years?

What say you?


bibere usque ad hilaritatem
Re: Dishwasher
tomtuttle #401900 03/14/14 09:47 PM
Joined: Jun 2002
Posts: 485
J
JBG Offline
devotee
Offline
devotee
J
Joined: Jun 2002
Posts: 485
Originally Posted By: tomtuttle
I'M BACK.

Well, the f*$king Kitchenaid has just about had it. Good riddance, you miserable POS.

I thought it was a nice unit, but it's been uncool for a while. I've had to fix the load spring thing (the doodad that makes it not seem like the door weighs 50 pounds) twice. Once, I did it, and then had it done. Had to remove the gasket around the soap dispenser so that it would close properly. Had to dissemble, clean and reassemble all the water squirty parts a couple of times (we actually have very SOFT water, so this makes no sense to me), bought one new silverware basket because the old one melted, and patched the new basket because it melted, too. I KNOW there are a couple other things in there, too, but I can't remember off the top of my head what they were.

Now, it doesn't reliably drain and the heater element seems to not work.

So, that SOB is going buh-bye.

Any new wisdom in the last four years?

What say you?


had a similar story with the whirlpool gold dishwasher on top of that it had became a fire hazard... best deals was at boxing day... we bought a LG dishwasher couldn't be happier! expect only 7 - 10 year life out of any one you buy no matter the brand or price... lg seems to agree with the wife factor.

Re: Dishwasher
JBG #401901 03/14/14 11:30 PM
Joined: Sep 2004
Posts: 11,451
shareholder in the making
Offline
shareholder in the making
Joined: Sep 2004
Posts: 11,451
Tom, Joyce and I bought a Kenmore Elite that still amazes us. It's only been a couple of years, though.


::::::: No disrespect to Axiom, but my favorite woofer is my yellow lab :::::::
Re: Dishwasher
Wid #401903 03/14/14 11:56 PM
Joined: May 2002
Posts: 5,289
axiomite
Offline
axiomite
Joined: May 2002
Posts: 5,289
For those not aware, there are only 2 or 3 major manufacturers for all major household appliances with the exception of some out of country (e.g. German made).
I've had a few repairmen come through our house to fix a Maytag washer (6 yrs old), a Kitchenaid dishwasher (small repair from a minor recall notice), a Maytag and a GE fridge...etc.
They've all told me these manufacturers engineer the products under the well known name brand companies but just these few parent corporations own them all. Even Sears/Kenmore buys parts from these makers and just puts together their own units.

Anyone feel free to correct this information if i've been misinformed.

All that being said, which is a good brand name for household appliances knowing that most of the parts and makers are pretty much coming from the same few manufacturers?

I asked this of a few repairmen and the answers always varied. Sure the guy has 30 years experience and says he repairs Maytag the least but then another equally qualified guy tells me he repairs KitchenAid the least.

I'm personally believing that you buy a unit for its features these days and just hope it lasts long enough for you to feel you got a decent buy out of the thing.
Nothing is made to last anymore.

Incidentally we bought a KitchenAid dishwasher about 4 years ago for 50% off its retail price of $1400 because they were 'last years' model and only had 4 left in the store. It was so damn quiet that my mother bought one as well later in the week.
We've had no major issues with them and they continue to perform about as well as could be expected from any decent dishwasher.
Yes, our glasses still have spots.
That's just life with chemistry.


"Those who preach the myths of audio are ignorant of truth."
Re: Dishwasher
Wid #401904 03/15/14 12:24 AM
Joined: Jun 2003
Posts: 8,488
T
axiomite
Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
Chess, I think you're right.

I'm pretty sure that Maytag, Whirlpool, Kitchenaid and JennAir are all made by one company, for instance. I know you're right that all Kenmores are basically retagged/upgraded models from other manufacturers including Whirlpool, GE and others.


bibere usque ad hilaritatem
Re: Dishwasher
Wid #401906 03/15/14 01:36 AM
Joined: Apr 2007
Posts: 4,872
connoisseur
Offline
connoisseur
Joined: Apr 2007
Posts: 4,872
I am in need of a quite dishwasher. Ours is sooo loud and may be on it's last leg. I think I printed out dishwasher recommendations last year when I had a CR subscription wonder if I can still find it...


-David
Re: Dishwasher
tomtuttle #401907 03/15/14 01:42 AM
Joined: May 2002
Posts: 5,289
axiomite
Offline
axiomite
Joined: May 2002
Posts: 5,289
Originally Posted By: tomtuttle
Chess, I think you're right.

I'm pretty sure that Maytag, Whirlpool, Kitchenaid and JennAir are all made by one company, for instance. I know you're right that all Kenmores are basically retagged/upgraded models from other manufacturers including Whirlpool, GE and others.

Well thanks Tom.
I'm not crazy then; at least, not at this moment.

I know Bosch is truly made in Germany and is of a different engineering group entirely but they are also kinda pricey, however i hear are of very high quality.
Still, our Kitchen Aid bought at half price has been stellar. I doubt i would have paid $1400 for it though. Our max price was probably around $900.


"Those who preach the myths of audio are ignorant of truth."
Re: Dishwasher
Wid #401909 03/15/14 01:49 AM
Joined: Apr 2007
Posts: 4,872
connoisseur
Offline
connoisseur
Joined: Apr 2007
Posts: 4,872
I need something with stainless steel front, inside stainless optional. Must be quiet and work well. Don't care about have 8 wash setting just a few options. Delayed start would be a bonus. $700 price point ideal . Any ideas?


-David
Re: Dishwasher
Wid #401911 03/15/14 05:37 AM
Joined: Jun 2003
Posts: 8,488
T
axiomite
Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
We ended up pulling the trigger on an 800 series Bosch that was in stock and on a good sale. Bosches don't seem any more expensive than other brands around here; lots of options from $650-800 or so. Install tomorrow, and I will report back.


bibere usque ad hilaritatem
Page 3 of 8 1 2 3 4 5 6 7 8

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,365
Posts431,744
Members15,414
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,437
SirQuack 13,682
CV 11,798
MarkSJohnson 11,451
Who's Online Now
0 members (), 145 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4