Spade/Fork Connectors on QS8's
|
Joined: Dec 2003
Posts: 6
regular
|
OP
regular
Joined: Dec 2003
Posts: 6 |
What size of spade or fork connectors would work the best on the QS8 binding posts? 1/4" or 5/16"
Thanks,
Dustyn
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Oct 2003
Posts: 494
devotee
|
devotee
Joined: Oct 2003
Posts: 494 |
I got 3/8s on mine, but it is a real bitch trying to get the QS8 on the wall bracket using spades.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Dec 2003
Posts: 19
frequent flier
|
frequent flier
Joined: Dec 2003
Posts: 19 |
Spades are a little tricky with the QS-8s, but I found if you come in from the opposite side so that the connectors fit inside that cup shape, you can get the speakers to mount flush with the wall, even with 12awg cable which is what Im using. I found it easier to take the screw completly off the post to allow room to manuver the connectors into place.
If you need a little more explanation Ill send ya a picture of what Im talkin about.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Apr 2003
Posts: 5,236
axiomite
|
axiomite
Joined: Apr 2003
Posts: 5,236 |
Just use bare wire. It's much easier, and you won't hear any difference.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Dec 2003
Posts: 6
regular
|
OP
regular
Joined: Dec 2003
Posts: 6 |
Thanks for all the input!
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Oct 2003
Posts: 494
devotee
|
devotee
Joined: Oct 2003
Posts: 494 |
How do you know I won't hear any difference?
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Apr 2003
Posts: 5,236
axiomite
|
axiomite
Joined: Apr 2003
Posts: 5,236 |
Bananas, spades, or bare wire. The point of them is ease of use, not sound quality. There should be, by design, no difference in sound.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Oct 2003
Posts: 494
devotee
|
devotee
Joined: Oct 2003
Posts: 494 |
Ahh, "there should be" but that doesn't mean there isn't hmm?
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: May 2002
Posts: 10,654
shareholder in the making
|
shareholder in the making
Joined: May 2002
Posts: 10,654 |
Yes Luis, unless the laws of physics have been overturned it means that there isn't any.
-----------------------------------
Enjoy the music, not the equipment.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Oct 2003
Posts: 494
devotee
|
devotee
Joined: Oct 2003
Posts: 494 |
So I take it you HAVE heard every spade, banana plug, or pin EVER made to come to this conclusion?
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Jul 2002
Posts: 958
aficionado
|
aficionado
Joined: Jul 2002
Posts: 958 |
In reply to:
So I take it you HAVE heard every spade, banana plug, or pin EVER made to come to this conclusion?
I respectfully ask; what is your point?
Have you heard connectors that "sound" different from others?
Can a connector "sound" better/worse than a bare wire to post configuration?
I live the life I love and I love the life I live.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: May 2003
Posts: 18,044
shareholder in the making
|
shareholder in the making
Joined: May 2003
Posts: 18,044 |
No. However, I don't think there are any magical properties of connectors that give them mysterious powers to circumvent the laws of physics in order to improve the audio signal in a perceptable manner.
Besides, how may more joints do you want in your signal path? Remember, those magical connectors have to be connected to the wire. That's another solder joint that could be iffy.
I am the Doctor, and THIS... is my SPOON!
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Apr 2003
Posts: 5,236
axiomite
|
axiomite
Joined: Apr 2003
Posts: 5,236 |
Damn...I sure didn't expect this to happen. Geesh. I thought these kind of brouhahas only came about when discussing cables and amps. It's just a connector for cripes sakes! Next thing you know people are going to be touting the audio benefits of certain remote controls. Stop the madness!
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Jul 2002
Posts: 1,344
connoisseur
|
connoisseur
Joined: Jul 2002
Posts: 1,344 |
Well it must follow that gold connectors will add a "warm" sound and silver will tend to add a bit of "brighness"
Getting to 2,000 posts; one year at a time vp160/qs8/qs4/SVS 2000/m60/Monolith 3x200 amp
|
|
|
Re: Spade/Fork Connectors on QS8's *DELETED*
|
Joined: Oct 2003
Posts: 494
devotee
|
devotee
Joined: Oct 2003
Posts: 494 |
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: May 2003
Posts: 973
aficionado
|
aficionado
Joined: May 2003
Posts: 973 |
I think you head the nail on the head here Ken, how many extra connections do you want in the signal path? A spade/fork will never improve the sound, but a bad connection can degrade the signal. Spades/forks are used for ease of connection when someone is hooking up and unhooking their speakers on a regular basis. There should be no other need for them.
"Chickens don't clap."
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Apr 2003
Posts: 16,441
shareholder in the making
|
shareholder in the making
Joined: Apr 2003
Posts: 16,441 |
I agree. It stands to reason that the fewer "transmission medium" transitions a signal has to make before it reaches the actual speaker driver -- to spell it all out for you: circuit board inside the receiver to speaker terminal on back of receiver to speaker wire connector to solder to copper wire to solder to speaker wire connector to binding post on speaker to solder to internal copper wire to solder to crossover circuitry to solder to copper wire to tweeter/mid/woofer -- the smaller the chance there is of degrading that signal.
It doesn't matter WHAT connector you use, since it cannot -- in and of itself -- improve the sound, but can possibly make it worse. The best connectors should, by definition, do NOTHING to the sound.
Using this same logic, the best connector is no connector. A tight (and some might say de-oxidized) bare-wire connection is as good as it gets.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: May 2003
Posts: 18,044
shareholder in the making
|
shareholder in the making
Joined: May 2003
Posts: 18,044 |
To argue the other side for a second, I think the reason some think it would improve the sound over bare wire would be that it's covering the bare wire, and therefore it has less of a chance of corrosion. However, I think the potential for a bad connection outweighs this argument.
I am the Doctor, and THIS... is my SPOON!
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Jan 2004
Posts: 3
newbie
|
newbie
Joined: Jan 2004
Posts: 3 |
I used connectors on my QS4 installs & had the same issue.
The main reason I used them was that with 12 gauge wiring the cables are so thick that you're never sure if you have a solid connection into the speaker (or the receiver for that matter) without them.
Plus, it makes for a much cleaner installation - I put wall jacks with terminals behind each surround and then made a patch cable to run from the jack to the speaker.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Feb 2002
Posts: 1,625
connoisseur
|
connoisseur
Joined: Feb 2002
Posts: 1,625 |
Wow - we delete things so rarely at Axiom, I had to get the manual out to find out what I needed to do! But this post certainly got tasteless, and for no reason that I could see at all. I would like to think that everyone agrees it wasn't representative of how we usually interact, and agrees that it is better not to preserve that sort of thing for posterity. I would hope that we can return to the regular 'Axiom tone' in the future, to keep the message boards welcoming to everyone.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Apr 2003
Posts: 70
old hand
|
old hand
Joined: Apr 2003
Posts: 70 |
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Jul 2002
Posts: 1,344
connoisseur
|
connoisseur
Joined: Jul 2002
Posts: 1,344 |
Getting to 2,000 posts; one year at a time vp160/qs8/qs4/SVS 2000/m60/Monolith 3x200 amp
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Dec 2003
Posts: 692
aficionado
|
aficionado
Joined: Dec 2003
Posts: 692 |
"Meddle not in the affairs of Dragons, for you are crunchy and good with ketchup..."
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Dec 2003
Posts: 6
regular
|
OP
regular
Joined: Dec 2003
Posts: 6 |
Wow............what did I start here???? ;-/
I was just wondering what size of connector fit the best in the QS-8's
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Oct 2003
Posts: 494
devotee
|
devotee
Joined: Oct 2003
Posts: 494 |
I agree, thanks Amie.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Oct 2003
Posts: 494
devotee
|
devotee
Joined: Oct 2003
Posts: 494 |
Wasn't you dude, but anyway did you figure out what size you were gonna go with?
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Apr 2003
Posts: 16,441
shareholder in the making
|
shareholder in the making
Joined: Apr 2003
Posts: 16,441 |
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Oct 2003
Posts: 494
devotee
|
devotee
Joined: Oct 2003
Posts: 494 |
...hum?
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Dec 2003
Posts: 6
regular
|
OP
regular
Joined: Dec 2003
Posts: 6 |
No, I never did figure out which size was actually "best". I am assuming that if you use a fork/spade connector, that just one side of the connector goes through the hole in the binding post. Someone did respond that they were using a 3/8" size, so I imagine either size should fit.
Still using bare wire for now.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Apr 2003
Posts: 5,236
axiomite
|
axiomite
Joined: Apr 2003
Posts: 5,236 |
If you use spades, you don't use the hole in the middle of the binding post. The spade stradles the post itself and then you tighten it down on top.
If your QS8's are wall mounted, using anything other than bare wire is going to be difficult. There's not much room back there for a connector.
|
|
|
Re: Spade/Fork Connectors on QS8's
|
Joined: Oct 2003
Posts: 494
devotee
|
devotee
Joined: Oct 2003
Posts: 494 |
Yeah that was me who said that, but even if you use a smaller spade you can just slide one prong into the hole in the binding post like it says in the Axiom Speaker Manual. With the larger 3/8 spade it was big enough to fit around the binding post. Hope that helps.
|
|
|
Forums16
Topics24,945
Posts442,484
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
1,228
guests, and
6
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|