Re: VP180 - ATMOSPHERIC ANGST
|
Joined: Jun 2008
Posts: 769
aficionado
|
aficionado
Joined: Jun 2008
Posts: 769 |
OK, so I sent an email to Axiom yesterday addressing this matter and here is the response I got:
"So the easiest thing for us to do would be just to swap out your VP180 woofers and you can send those ones back with just the cost of the shipping, if you want to change your other speakers to the new drivers we would have to know the serial # on your M80's so we can figure out what you would need to upgrade them, and last of all, we are putting on the site in a couple of weeks a new program for upgrading your old speakers, so you will be able to sell your old speakers and use the money to buy new ones."
Hope this helps.
Bruno M80s/VP180/QS8s/EP600/AVR-890 ------------------------------------ "The problem is choice..."
|
|
|
Re: VP180 - ATMOSPHERIC ANGST
|
Joined: Sep 2008
Posts: 4,116
connoisseur
|
connoisseur
Joined: Sep 2008
Posts: 4,116 |
OK, so I sent an email to Axiom yesterday addressing this matter and here is the response I got:
"So the easiest thing for us to do would be just to swap out your VP180 woofers and you can send those ones back with just the cost of the shipping, if you want to change your other speakers to the new drivers we would have to know the serial # on your M80's so we can figure out what you would need to upgrade them, and last of all, we are putting on the site in a couple of weeks a new program for upgrading your old speakers, so you will be able to sell your old speakers and use the money to buy new ones."
Hope this helps. Thanks BDPF, but this matter is still a little confusing for me regarding driver replacements. Does the bolded part refer to taking out the new aluminum cones and sending them back for replacements for the older drivers (black dust cap)? And while we are talking about versions does it just refer to the M80ti to M80 V2 or does the ti to V2 correspond to all models when changing to the new all aluminum cones? Thanks!
I’m armed and I’m drinking. You don’t want to listen to advice from me, amigo.
-Max Payne
|
|
|
Re: VP180 - ATMOSPHERIC ANGST
|
htnut
Unregistered
|
htnut
Unregistered
|
Well, for anyone interested in a VP180 with BLACK caps, I know for a fact that the white capped drivers can be swapped for the black capped ones without any issue.
|
|
|
Re: VP180 - ATMOSPHERIC ANGST
|
Joined: Sep 2008
Posts: 4,116
connoisseur
|
connoisseur
Joined: Sep 2008
Posts: 4,116 |
Well, for anyone interested in a VP180 with BLACK caps, I know for a fact that the white capped drivers can be swapped for the black capped ones without any issue. Yes. But it is a matter of Axiom deciding to continue to manufacture and supply them or not and for how long (till they run out of current inventory???). That is what is not clear at this point.
I’m armed and I’m drinking. You don’t want to listen to advice from me, amigo.
-Max Payne
|
|
|
Re: VP180 - ATMOSPHERIC ANGST
|
Joined: Jun 2008
Posts: 769
aficionado
|
aficionado
Joined: Jun 2008
Posts: 769 |
The way I understand it is: - If you want the VP180 with white/black drivers, there is no problem, they'll send you the black/white and you return the all-white. - If you want your other speakers to have the all-white drivers, then they need to know your serial number so they can know if there is other components that need to be replaced in order to work with the all-white drivers (crossover maybe?)
Bruno M80s/VP180/QS8s/EP600/AVR-890 ------------------------------------ "The problem is choice..."
|
|
|
Re: VP180 - ATMOSPHERIC ANGST
|
Joined: Sep 2008
Posts: 4,116
connoisseur
|
connoisseur
Joined: Sep 2008
Posts: 4,116 |
Thanks again BDPF, that was very helpful.
Cheers!
I’m armed and I’m drinking. You don’t want to listen to advice from me, amigo.
-Max Payne
|
|
|
Re: VP180 - ATMOSPHERIC ANGST
|
Joined: Jun 2008
Posts: 769
aficionado
|
aficionado
Joined: Jun 2008
Posts: 769 |
Well, for anyone interested in a VP180 with BLACK caps, I know for a fact that the white capped drivers can be swapped for the black capped ones without any issue. Yes. But it is a matter of Axiom deciding to still manufacture and supply them or not and for how long (till they run out of current inventory???). That is what is not clear at this point. Since the new V3 line will be all-white drivers, I would guess that they would supply the black/white for a limited time just to make their current customer that are upgrading happy.
Bruno M80s/VP180/QS8s/EP600/AVR-890 ------------------------------------ "The problem is choice..."
|
|
|
Re: VP180 - ATMOSPHERIC ANGST
|
Joined: Jun 2008
Posts: 769
aficionado
|
aficionado
Joined: Jun 2008
Posts: 769 |
BTW, how complicated is it to replace a driver? Is it as simple as removing the screws, taking it out, disconnect the + and - cables and put the new one back in?
Bruno M80s/VP180/QS8s/EP600/AVR-890 ------------------------------------ "The problem is choice..."
|
|
|
Re: VP180 - ATMOSPHERIC ANGST
|
Joined: May 2003
Posts: 18,044
shareholder in the making
|
shareholder in the making
Joined: May 2003
Posts: 18,044 |
For the drivers, yes, it's that simple. My understanding is that if you need to replace crossovers, soldering is involved.
I am the Doctor, and THIS... is my SPOON!
|
|
|
Re: VP180
|
Joined: Apr 2003
Posts: 16,441
shareholder in the making
|
shareholder in the making
Joined: Apr 2003
Posts: 16,441 |
Since the new V3 line will be all-white drivers, I would guess that they would supply the black/white for a limited time just to make their current customer that are upgrading happy. This is my assumption, too. I can't see Axiom making two version of each non-tweeter driver in perpetuity.
|
|
|
Forums16
Topics24,945
Posts442,489
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
1,092
guests, and
2
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|