Any graphic artists here?
|
Joined: Sep 2004
Posts: 5,422
axiomite
|
OP
axiomite
Joined: Sep 2004
Posts: 5,422 |
I am pretty decent at modifying or tweaking photos and such, but straight up creation work is not something that I am good at. I was wondering if someone with a little more talent would be willing to create an image for me. I ordered some acoustical insulation panels (Owens Corning 703) today, and I will have 4 panels on each wall, and one on the rear wall. That one on the rear wall I want to have custom printed fabric put on it as my new sign for my theater. There is a whole thread on AVS about this place that will print things up for you using a material that has proved to work with acoustical panels. A lot of people are making acoustical panels that look like movie posters (somehow getting around the copyright thing). I don't plan to do that, but like I said would like something for my rear wall. That panel will be 24 inches tall x 48 inches wide on the face. That is where the main wording should go. Then the image needs to extend another 6 inches top/bottom/left/right as the panel will be 4 inches deep from the wall, and adds another 1/2" of thickness to each side (beveled so the image should still fit in the 24" x 48" space). That means a total size of 36" tall x 60" wide with the main lettering within the middle 24" x 48". The fabric place likes 150 dpi minimum. The theater has been dubbed "The Starlight Theatre" (notice the 're' and not 'er' in theatre) since my very first home theater years and years ago due to always having some sort of star ceiling. I just want to update the look of my sign and at the same time use it for decor over an acoustical panel. Here is the original sign in the photo from pre-V4.0 construction. It is black plastic with "sticker" type decals and gold frame done up at a local sign shop. It looks a bit dated. I am a cheap sun-of-a-gun, but could probably find something to barter with for the time. I am sure that I could find some quality trinket reflective of the state of Iowa if nothing else. Obviously I don't expect some massive 50MB or greater file. Although if you make one, you can post a smaller image of it here and I can give you a spot online (FTP account to my web space) to put a full sized file. So let's see your creativity. Looking for something simple and clean with colors that would go with different shades of browns, deep (really deep) burgundy, or deep blue even (since it is "sky" like and the night sky is dark). Lettering or any design element shouldn't be "too fine" or too similar in color since this is going to get printed on fabric and contrast will help as will a little more "thickness" to any words/elements.
Farewell - June 4, 2020
|
|
|
Re: Any graphic artists here?
|
Joined: Feb 2004
Posts: 1,863
connoisseur
|
connoisseur
Joined: Feb 2004
Posts: 1,863 |
nick for something the size your wanting to print. you're gonna way 300-350dpi.. Also, depending on how creative you want the image to be, something that size in a TIFF is gonna be pretty freaking big man.. Several hundred megs depending.
When i print 16X20" photos, those images are around 300megs. Or so... Granted those are photos, with a lot more going on.. But, you get the idea.
|
|
|
Re: Any graphic artists here?
|
Joined: Sep 2004
Posts: 5,422
axiomite
|
OP
axiomite
Joined: Sep 2004
Posts: 5,422 |
I know what you are saying, but they are saying that due to the nature of it being printed on fabric and not on a truly solid surface, you can't print 300+ dpi anyway. They can accept it, but it will just look closer to 150 dpi when done, again due to the nature of fabric having threads and holes that you can see. EDIT: OK. According to their website (spoonflower.com): As a rule of thumb, an image the size of a standard sheet of paper in landscape (11"x8.5") at 300 dpi will fill an 18"x21" fat quarter. The same sheet at 600 dpi will fill a yard (42" wide x 36" long).
Acceptable file formats are JPG, PNG, GIF, TIF, SVG, AI, and EPS, and the file must be less than 40 MB. Vector files (AI, SVG, or EPS) are converted to PNG format during the upload process at a size chosen by you. With their yards at 42" wide I will need to get 2 yards (won't use it all) to get a piece 42" x 72" using just the 36" x 60" middle of that. EDIT2: So I opened up Photoshop and just saved a 36" x 60" image of nothing as a TIFF (since TIFF isn't compressed, it would give me the final file size no matter what I put in it). It came to 139MB at 150 dpi since that seems to be what they can print at. Since I am limited to a file size of 40 MB, I would have to do some level of compression.
Last edited by nickbuol; 07/24/13 04:03 AM. Reason: Added EDITS 1 and 2
Farewell - June 4, 2020
|
|
|
Re: Any graphic artists here?
|
Joined: Sep 2004
Posts: 5,422
axiomite
|
OP
axiomite
Joined: Sep 2004
Posts: 5,422 |
FYI. I just ordered a full size yard of their Kona Cotton fabric with the 1400 color swatches and color codes that I can get the exact colors I want in the end. Will take about 2 weeks to get here though. Won't stop the creativity though as I could do a color swap if need be.
Farewell - June 4, 2020
|
|
|
Re: Any graphic artists here?
|
Joined: Apr 2003
Posts: 16,441
shareholder in the making
|
shareholder in the making
Joined: Apr 2003
Posts: 16,441 |
Do you want a monochromatic file, that you can then order as a solid color or gray tone, or do you want something with multiple colors?
Also, will these panels be vertically or horizontally oriented?
Last edited by pmbuko; 07/24/13 05:20 AM.
|
|
|
Re: Any graphic artists here?
|
Joined: Sep 2004
Posts: 5,422
axiomite
|
OP
axiomite
Joined: Sep 2004
Posts: 5,422 |
At this point I am only doing one panel with this fabric, although I may decide to do something complimentary for the 8 side wall panels. "The Starlight Theatre" panel I am mainly focusing on is wide, and not tall. So more horizontal than vertical. The wall panels are a little smaller at 2'x3' instead of the 2'x4' and the wall ones are only 2" thick instead of 4" thick and vertical instead of horizontal. If I find a nice design for the back wall, I may carry over the design somehow to the side walls. It will cost me about $85 for fully custom wall panel fabric vs. $35 or so for something stock that will be "close enough."
As for colors, I guess I don't want a whole rainbow or anything. My first thought was a set or stars (real vs. graphical 5-point) with a "The Starlight Theatre" words in the foreground. That would be a limited color palette, but again, I am looking to you Axiomites for some inspiration and talent so I am open to ideas.
Farewell - June 4, 2020
|
|
|
Re: Any graphic artists here?
|
Joined: Sep 2004
Posts: 5,422
axiomite
|
OP
axiomite
Joined: Sep 2004
Posts: 5,422 |
Here is a quick "mock up" image that I did with MSPaint (all I have at my disposal on this computer). I am not saying to use this at all for the design. This was something I used to explain what I was doing on the AVS thread about printed fabric. The dimensions don't take into account the 1/2" wide material used for the frames or that the fabric needs to wrap around the back to be attached.
Farewell - June 4, 2020
|
|
|
Re: Any graphic artists here?
|
Joined: Sep 2004
Posts: 5,422
axiomite
|
OP
axiomite
Joined: Sep 2004
Posts: 5,422 |
Just to add to my post count and geek factor. For those wondering how printed fabric can possibly be acoustically transparent enough to work for acoustical panels, here are some graphs. Credit goes to mtbdudex from AVSForums for the research, graphs, and conclusion. Midrange with Spoonflower Kona cotton cloth, baseline and @ 0, 45, 60 degrees Tweeter with Spoonflower Kona cotton cloth, baseline and @ 0, 45, 60 degrees Conclusion from the midrange/tweeter charts: Spoonflower Kona cotton cloth is AT and good to go for acoustic absorber panels usage.
Farewell - June 4, 2020
|
|
|
Re: Any graphic artists here?
|
Joined: Sep 2004
Posts: 5,422
axiomite
|
OP
axiomite
Joined: Sep 2004
Posts: 5,422 |
Farewell - June 4, 2020
|
|
|
Re: Any graphic artists here?
|
Joined: Sep 2004
Posts: 5,422
axiomite
|
OP
axiomite
Joined: Sep 2004
Posts: 5,422 |
Farewell - June 4, 2020
|
|
|
Forums16
Topics24,946
Posts442,492
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
629
guests, and
2
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|