Re: M100 or LFR1100
|
Joined: May 2003
Posts: 18,044
shareholder in the making
|
shareholder in the making
Joined: May 2003
Posts: 18,044 |
They customize the DSP for the center that it will be used with. In other words, if you ordered one for your LFRs and your VP180, the DSP would be built for the LFRs and the VP180. If someone ordered one for their M80s and a VP160, it would be built for those.
I am the Doctor, and THIS... is my SPOON!
|
|
|
Re: M100 or LFR1100
|
Joined: May 2014
Posts: 65
old hand
|
OP
old hand
Joined: May 2014
Posts: 65 |
That's nice. I have a gut feeling that I will end up bypassing Audyssey!
|
|
|
Re: M100 or LFR1100
|
Joined: May 2014
Posts: 65
old hand
|
OP
old hand
Joined: May 2014
Posts: 65 |
Got a reply from Brent and I quote
"The LFR1100 or any omni-directional performing speaker, would not be compatible with Audyssey or other room correction devices. Turn the room correction off and set up the system manually for the best performance for both music or movie soundtracks. The DSP provides a very linear performance to the VP180 which is already avery linear performer. The gain is not substantial with the DSP for the center speaker. You would have mush greater improvement to the system by upgrading the VP180 from v3 to v4 high power to match the LFR1100 which are High Power as well."
Hopefully this helps anyone who may be in the same boat.
-Howard
|
|
|
Re: M100 or LFR1100
|
Joined: Jun 2009
Posts: 89
old hand
|
old hand
Joined: Jun 2009
Posts: 89 |
So for one that already has an AVR with auto correction software such as Audyssey MultXT 32 the DSP inclusion for LFRs would be out of place, or rather the AVR would. This really makes me want to hear them now, because I love the sound correction made by my Denon X4000. I suppose if once testing LFRs after manually setting them up properly you'd have to decide which sounds better, the LFRs or the previous stereo/AVR setup, then either returning the entire setup of LFRs with their DSP, or returning/selling your fancy AVR with auto correction depending on which you could finally decide on.
M60|VP150|2xQS8|PSA XS30+Epik Empire|Pioneer Kuro 6010FD|PS3|Denon AVR-X4000|Parasound 5250v.2|
|
|
|
Re: M100 or LFR1100
|
Joined: Dec 2013
Posts: 84
old hand
|
old hand
Joined: Dec 2013
Posts: 84 |
I currently have the VP180 non-HP and I did get the DSP for the center but have not tried to do any evaluation between with and without the center DSP.
|
|
|
Re: M100 or LFR1100
|
Joined: Mar 2012
Posts: 286
local
|
local
Joined: Mar 2012
Posts: 286 |
So for one that already has an AVR with auto correction software such as Audyssey MultXT 32 the DSP inclusion for LFRs would be out of place, or rather the AVR would. This really makes me want to hear them now, because I love the sound correction made by my Denon X4000. I suppose if once testing LFRs after manually setting them up properly you'd have to decide which sounds better, the LFRs or the previous stereo/AVR setup, then either returning the entire setup of LFRs with their DSP, or returning/selling your fancy AVR with auto correction depending on which you could finally decide on. You could get the LFRs without the DSP for the centre channel, then you'd still be able to use Audyssey for the centre and surrounds. That is, as long as your receiver allows this option. I cannot imagine that, after hearing the LFRs, you'd want to send them back...
|
|
|
Re: M100 or LFR1100
|
Joined: May 2014
Posts: 65
old hand
|
OP
old hand
Joined: May 2014
Posts: 65 |
So for one that already has an AVR with auto correction software such as Audyssey MultXT 32 the DSP inclusion for LFRs would be out of place, or rather the AVR would. That is what my original concern with LFR1100 was knowing that it's not going to be compatible with room correction software. But I took the plunge and ordered a set anyway. I did so because knowing Andrew's past experience in designing Dipolar/Omnidirectional loudspeakers. I also got the VP180 V4 HP center upgrade just for the heck of it and I still got the M80 V3 so I will be able to do some comparison tests too.
|
|
|
Re: M100 or LFR1100
|
Joined: May 2014
Posts: 65
old hand
|
OP
old hand
Joined: May 2014
Posts: 65 |
Update: I was planning to power the LFRs with pair of Parasound A21. But I sold them today to a friend so my plan has to alter for a bit. A colleague of mine who happens to be an audiophile told me he has been testing his Revel Salon2 with a pair of pro amp by Crown for few months and he was very impressed by them. Today I had the pleasure to listen to his salons in his house driven by two Crown XLS 2500 and I too am impressed by what I heard. We discussed the possibility of removing the fan and make the unit passive cooled as well as making a 12V trigger to power on the units to better suit the home environment . Long story short, few hours later (I gotta stop spending money on audio gear, according to my better half) I took the plunge and ordered two sets of Crown XLS2000 for my mains, and three sets of Crown XLS1500 to power my new VP180 V4HP and four QS8. I think it's safe to say I should have enough power for my new home theatre I will let you guys know how it turns out. Below are the spec of the XLS series and a thread by Andrew Robinson, interesting reads. XLS 1000 XLS 1500 XLS 2000 XLS 2500 Stereo (2 Ohms) 550 Watts 775 Watts 1050 Watts 1200 Watts Stereo (4 Ohms) 350 Watts 525 Watts 650 Watts 775 Watts Stereo (8 Ohms) 215 Watts 300 Watts 375 Watts 440 Watts Bridge (8 Ohms) 700Watts 1050 Watts 1300 Watts 1550 Watts Bridge (4 Ohms) 1100 Watts 1550 Watts 2100 Watts 2400 Watts http://www.crownaudio.com/xls-drivecore.htmlhttp://www.hometheaterequipment.com/mono....html#post20994-Howard
Last edited by iloveturbo; 05/30/14 06:58 AM.
|
|
|
Re: M100 or LFR1100
|
Joined: Mar 2014
Posts: 43
buff
|
buff
Joined: Mar 2014
Posts: 43 |
Please share your impressions after you get them hooked up! I use a pro amp for my subs, but hadn't considered going with pro amps for the other speakers.
UMC-200, XPA-3, XPA-5, iNuke 3000DSP, M22's for LCR, 4 QS8's, 2 Ultimax 15" in DIY 12cuft ported box
|
|
|
Re: M100 or LFR1100
|
Joined: Jan 2011
Posts: 1,291
connoisseur
|
connoisseur
Joined: Jan 2011
Posts: 1,291 |
i use pro-amps for all my speakers, except for the subs which have their own amplification. i would not want it any other way.
|
|
|
Forums16
Topics24,945
Posts442,489
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
997
guests, and
4
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|