Re: Question on ATMOS
|
Joined: Sep 2004
Posts: 5,422
axiomite
|
axiomite
Joined: Sep 2004
Posts: 5,422 |
Yeah, I have on-wall M3 speakers that I am using for Atmos. My ceiling is a few inches under 8feet, so I needed to angle each entire speaker.
If I was starting from the construction phase, I would have planned for in-ceiling speakers instead for a cleaner look since the in-ceiling M3s have aimable tweeters. Since my room is soundproofed, I would have had to cut 4 large holes into my soundproofed ceiling, and besides compromising the soundproof structure, I also would have never found 4 good locations for speakers that wouldn't hit some ceiling joist or drywall decoupling hat-channel.
So that mean something below my ceiling, and with a ceiling under 8 feet, I had to be able to aim the whole thing.
Farewell - June 4, 2020
|
|
|
Re: Question on ATMOS
|
Joined: Feb 2004
Posts: 635
aficionado
|
OP
aficionado
Joined: Feb 2004
Posts: 635 |
Well, ok got it figured out. I am upgrading the M22 to the M5HP I have the VP160 coming on Layaway currently. I will be upgrading the EP350 to a second EP500. Have a EP500 on layaway now, hoping to be paid off March. For now I will be using QS8 in a 5.2 setup. I currently have a AVM30, this will get upgraded to the Anthem AVM60 next year. I have a MCA50 now which will run the surrounds. Those will be On Wall M3's. I will pick up a MCA5 for ATMOS speakers, These I decided on four normal M3's which will be angled towards me. I will be making the ceiling with recessed locations so they will be pretty flush. As the MCA's are 285w per this is way more than I need. I will be picking up a MCA20 to run the from L/R , the centre I will run off the MCA50 centre channel. The MCA's have a dual Toridal transformers. The rear left right and centre run off one and the L/R are on the other. If used in a 5 channel system. I will also have my dual EP500's. I am going with the M3 as the M5HP OW are only 5db lower in frequencies, nothing really noticeable and will save $1500.
As you know my room is only 11.5ft wide so to actually get the full use of the M5HP on the side wall, It would most likely need be above my listening preferences.
Pretty sure this system in a 11.5 x 15 x 7.5 room 1300sqf will be awesome, probably the most awesomest in my town lol
Anthem MRX520 M5HPv4 VP160HPv4 QS10v4
|
|
|
Re: Question on ATMOS
|
Joined: Jan 2007
Posts: 10,490 Likes: 116
shareholder in the making
|
shareholder in the making
Joined: Jan 2007
Posts: 10,490 Likes: 116 |
Wow! A roadmap for your home theatre. Impressive.
House of the Rising Sone Out in the mid or far field Dedicated mid-woofers are over-rated
|
|
|
Re: Question on ATMOS
|
Joined: Feb 2004
Posts: 635
aficionado
|
OP
aficionado
Joined: Feb 2004
Posts: 635 |
Wow! A roadmap for your home theatre. Impressive. goto or I get side tracked and find myself in the States somewhere. Actually by the time this is all done there be an update to ATMOS, probably Auro-3D and Axiom v5 will come out just as I am about to order the ATMOS Speakers
Anthem MRX520 M5HPv4 VP160HPv4 QS10v4
|
|
|
Re: Question on ATMOS
|
Joined: Feb 2004
Posts: 635
aficionado
|
OP
aficionado
Joined: Feb 2004
Posts: 635 |
I'm actually just waiting to see if they do upgrade that Mid driver. I mean new HP6.5 's new tweeters, new cross overs. What's left ???? new higher performing Mid range
Anthem MRX520 M5HPv4 VP160HPv4 QS10v4
|
|
|
Forums16
Topics24,945
Posts442,489
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
1,092
guests, and
2
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|