Re: Is my amp powerful enough?
|
Joined: Sep 2004
Posts: 11,458
shareholder in the making
|
shareholder in the making
Joined: Sep 2004
Posts: 11,458 |
Yes....correct.
One more suggestion, though: Using that center channel speaker is going to hurt the potential sound quality overall. I would remove it, and set your receiver to output a phantom center image.
This means, when you don't have a benter speaker, that your receiver splits the center channel info between your L and R main speakers...in this case, much more capable speakers.
There's a lot of info on the center channel, and putting that through that small speaker will hold you back.
::::::: No disrespect to Axiom, but my favorite woofer is my yellow lab :::::::
|
|
|
Re: Is my amp powerful enough?
|
Joined: Dec 2012
Posts: 96
old hand
|
OP
old hand
Joined: Dec 2012
Posts: 96 |
Alright, I've got no clue how to set that up on the Amp but I'll give it a shot. I think it's time to sell the Energy and get me a new center chan.
Any suggestions that would mate well with M80's and M22's?
Thanks, you're all a great help!
VP180v3, M80v2, QS8v4, Arcam AV860, Rotel RMB1585, Epson 5050ub
|
|
|
Re: Is my amp powerful enough?
|
Joined: Aug 2009
Posts: 6,015
axiomite
|
axiomite
Joined: Aug 2009
Posts: 6,015 |
First choice: VP180 Second choice: VP160
Phantom center: Just disconnect the center speaker from AVR, then rerun any sound calibration that comes with the receiver, such as Audyssey, MCACC, etc.
|
|
|
Re: Is my amp powerful enough?
|
Joined: Feb 2004
Posts: 1,863
connoisseur
|
connoisseur
Joined: Feb 2004
Posts: 1,863 |
the 180, is basically an M80 on it's side, with a slightly different driver configuration...
And, it's FREAKING awsome.......
|
|
|
Re: Is my amp powerful enough?
|
Joined: Dec 2012
Posts: 96
old hand
|
OP
old hand
Joined: Dec 2012
Posts: 96 |
What about the VP150?
Price is good, it's big enough (27") Do the 160 and 180 really pound that much harder?
VP180v3, M80v2, QS8v4, Arcam AV860, Rotel RMB1585, Epson 5050ub
|
|
|
Re: Is my amp powerful enough?
|
Joined: Aug 2009
Posts: 6,015
axiomite
|
axiomite
Joined: Aug 2009
Posts: 6,015 |
What about the VP150?
Price is good, it's big enough (27") Do the 160 and 180 really pound that much harder? The VP100 and the VP150 is a good match for the M22's. For anything bigger, you really want more oomph that only the 160 and 180 can give you. I'm using the 160 with M22's with good results.
|
|
|
Re: Is my amp powerful enough?
|
Joined: Feb 2004
Posts: 1,863
connoisseur
|
connoisseur
Joined: Feb 2004
Posts: 1,863 |
What about the VP150?
Price is good, it's big enough (27") Do the 160 and 180 really pound that much harder? It's not about how much bass they put out; it's more about the full sound spectrum that the 180 can cover. It’s hard to put into words; due to the significant amount of audio material in the Center channel of almost any content one watches. Having a full sized center channel is the ideal situation. The dialog from conversations, as well as musical content coming from the center channel is much more realistic with a speaker that has a larger frequency response.. It’s more of a “presence” issue than a bass issue. I had a VP-150 for many years with my M60’s, and always felt that the 150 was not enough speaker to match the over -all output of the M60’s.. With a similar sized speaker the entire sound stage can be better balanced…. That is my rational for getting my 180…
|
|
|
Re: Is my amp powerful enough?
|
Joined: Dec 2012
Posts: 96
old hand
|
OP
old hand
Joined: Dec 2012
Posts: 96 |
But it's a monster lol!
I'll need a whole new stand just for that speaker. What to do..
One more question fellas, Having 5 speakers setup vs having only 2 connected, puts more stress on the Amp ?
VP180v3, M80v2, QS8v4, Arcam AV860, Rotel RMB1585, Epson 5050ub
|
|
|
Re: Is my amp powerful enough?
|
Joined: Jan 2004
Posts: 13,841 Likes: 13
shareholder in the making
|
shareholder in the making
Joined: Jan 2004
Posts: 13,841 Likes: 13 |
I think the 150 would be a fine match, especially in that room, it is more for dialog in movies. I owned one for many years with my m60's and leter m80's, in my bigger room, it it was fine.
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: Is my amp powerful enough?
|
Joined: May 2002
Posts: 10,654
shareholder in the making
|
shareholder in the making
Joined: May 2002
Posts: 10,654 |
Chris, the idea is to have the speakers maybe an inch in front of the stand surface to minimize reflections and refractions. With the current Energy center, bring it forward and stand it up vertically.
The suggestion to try the M80s to form a "phantom" center is a good one. This is done simply by setting the center speaker "None" in the 888's speaker setup menu. Any center channel material is then automatically sent equally to the two mains which create the image midway between them. The advantages of a separate center speaker include keeping the image in the center for listeners off-center(the "phantom" shifts with the listener)and the ability to set it louder independent of the mains to compensate for dialog set too low in a movie.
For a better center speaker, the VP160 or VP180 would be fine, but a more economical choice that would do the job is a vertical M22 that essentially matches the M80 above the bass area. Your stand appears to be about 20" high, which would be ideal to make the M22 also match the M80 height. You could experiment with one of your present M22s, or even use both of them side-by-side.
If you have other Energy speakers, they could be used as surrounds. Using those speakers at close range as surrounds in your small room might justify experimenting with placing them to the side of the listening position, but facing toward the back wall to get a more diffuse sound suitable for surround effects.
-----------------------------------
Enjoy the music, not the equipment.
|
|
|
Forums16
Topics24,947
Posts442,495
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
715
guests, and
1
robot. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|