You are not logged in. [Log In]


Forums » General Discussion » Technical Questions » Using The Radio Shack SPL Meter?

Page 2 of 2 < 1 2
Topic Options
Rate This Topic
#149710 - 10/18/06 07:25 PM Re: Using The Radio Shack SPL Meter? [Re: Robot]
SirQuack Offline
shareholder in the making

Registered: 01/29/04
Posts: 13565
Loc: Iowa
My Denon setup is very accurate, I don't tweek it much from those settings. I do not use the EQ part of the setup thought, it makes my 60's sound worse. Levels, Delay, etc. it is dead on...
_________________________
M80s-VP180-4xM22ow-4xM3ic-EP600-2xEP350
Anthem AVM60 Outlaw 7700 Emotiva A500 Epson 5040UB



Top
#149711 - 10/18/06 07:35 PM Re: Using The Radio Shack SPL Meter? [Re: Haoleb]
cava Offline
enthusiast

Registered: 08/23/06
Posts: 33
I turn the volume down when its too loud

Top
#149712 - 10/18/06 11:42 PM Re: Using The Radio Shack SPL Meter? [Re: cava]
BrenR Offline
connoisseur

Registered: 12/10/03
Posts: 3602
Loc: Winnipeg MB Canada
I also suggest pointing the SPL meter toward the screen at ear level (use a tripod). I find it more accurate reflects what you'll hear (unless your audio canals point straight up out of your head) when you're sitting facing the screen.

Bren R.

Top
#149713 - 10/18/06 11:52 PM Re: Using The Radio Shack SPL Meter? [Re: Robot]
JohnK Offline
shareholder in the making

Registered: 05/11/02
Posts: 10621
Ro, basically you can rely on MCACC on your Pioneer to accurately set the speaker levels. There's no good reason to expect that a manual setting using the RS meter will be more accurate. That meter isn't a precision instrument(they claim +/-2dB accuracy)and the element of human error can also affect a manual calibration, so if the results differ it shouldn't be assumed that the manual results are more nearly correct.

If you do use the manual setting process, follow the instructions in your receiver's manual. Generally receiver tones are at 75dB and the receiver volume setting is at 0 for the calibration. Then if you desire listening at that "reference level"(usually too loud)you'd have the receiver volume control at 0, where it was for the calibration.
_________________________
-----------------------------------

Enjoy the music, not the equipment.



Top
#149714 - 10/19/06 05:29 PM Re: Using The Radio Shack SPL Meter? [Re: JohnK]
mrnomas Offline
old hand

Registered: 02/16/05
Posts: 86
Loc: Florida
I agree with John. In my experience, the MCACC will accurately set your levels. Just check the speaker size and the sub distance. That will be where it messes up.
_________________________
Professional Axiom Lurker

Top
Page 2 of 2 < 1 2

Moderator:  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 
Forum Stats

15,206 Registered Members
15 Forums
23,962 Topics
423,591 Posts

Most users ever online:
883 @ 03/04/17 05:06 PM

Top Posters
Ken.C 18044
pmbuko 16437
SirQuack 13565
CV 11675
MarkSJohnson 11437
1 registered (brendo)
342 Guests and
8 Spiders online.
Key: Admin, Global Mod, Mod
Newsletter Signup