You are not logged in. [Log In]


Forums » General Discussion » Home Theater » QS8 vs. QS4 -- Big Difference?

Page 3 of 3 < 1 2 3
Topic Options
Rate This Topic
#190227 - 01/01/08 11:55 AM Re: QS8 vs. QS4 -- Big Difference? [Re: Ken.C]
SoundsGood Offline
regular

Registered: 12/30/07
Posts: 6
Thanks guys. I'll probably go with the QS8s for the side surrounds, since the ceiling pre-wiring for the side speakers is only about 5 inches away from the side walls.

But I'll most likely have to use regular ceiling speakers (flush with the ceiling) for the two rear speakers. Reason is because the kitchen is connected to the family room front-to-back, and the living room and dining room are connected to the kitchen. It's one big open space. Therefore, having anything hanging from the ceiling (right smack-dab in the middle of the house) would look nasty. My wife would never go for it. Actually, I'm not sure *I'd* go for it! ;\)

Anyone have any recommendations for plain ol' ceiling speakers that don't sound too bad?

Top
#190291 - 01/01/08 08:27 PM Re: QS8 vs. QS4 -- Big Difference? [Re: SoundsGood]
danmagicman7 Offline
connoisseur

Registered: 12/16/05
Posts: 1467
If you look at my review...there is a difference between the QS4's and QS8's...

http://www.axiomaudio.com/boards/ubbthreads.php?ubb=showflat&Number=189754#Post189754
_________________________

M22s|VP100|QS4s|HSU STF2

Top
#190304 - 01/01/08 09:03 PM Re: QS8 vs. QS4 -- Big Difference? [Re: danmagicman7]
jakewash Offline
shareholder in the making

Registered: 12/26/03
Posts: 10415
Loc: Calgary, Alberta
I did find the older QS4s sounding different tonally than the QS8s I wonder if it was the smaller driver causing that difference as well as that hybrid tweeter they ran.
_________________________
Jason
-----------------
TTTHHHPPPPPTTTT!

My HT

Top
#192100 - 01/14/08 09:32 AM Re: QS8 vs. QS4 -- Big Difference? [Re: jakewash]
SoundsGood Offline
regular

Registered: 12/30/07
Posts: 6
Anyone know how much clearance is needed from the top of the QS4/QS8 to the ceiling?

Top
#192101 - 01/14/08 09:38 AM Re: QS8 vs. QS4 -- Big Difference? [Re: SoundsGood]
SirQuack Offline
shareholder in the making

Registered: 01/29/04
Posts: 13567
Loc: Iowa
I would say try to go no less than 4" if possible. I used some DIY brackets with nice plastic covers to hide the wires, I picked up at Menards. I believe I have about 6" or so of clearance and it works fine.

Current Qs8's


Back when I had the mansfield color...

_________________________
M80s-VP180-4xM22ow-4xM3ic-EP600-2xEP350
Anthem AVM60 Outlaw 7700 Emotiva A500 Epson 5040UB



Top
#192102 - 01/14/08 09:39 AM Re: QS8 vs. QS4 -- Big Difference? [Re: SirQuack]
SirQuack Offline
shareholder in the making

Registered: 01/29/04
Posts: 13567
Loc: Iowa
Also, if you have the money, Axiom has some nice new brackets that swivel and tilt and work good for ceiling installs.
_________________________
M80s-VP180-4xM22ow-4xM3ic-EP600-2xEP350
Anthem AVM60 Outlaw 7700 Emotiva A500 Epson 5040UB



Top
#192109 - 01/14/08 10:35 AM Re: QS8 vs. QS4 -- Big Difference? [Re: SirQuack]
SoundsGood Offline
regular

Registered: 12/30/07
Posts: 6
Good stuff... thanks guys!

Top
Page 3 of 3 < 1 2 3

Moderator:  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 
Forum Stats

15,224 Registered Members
15 Forums
23,992 Topics
424,052 Posts

Most users ever online:
883 @ 03/04/17 05:06 PM

Top Posters
Ken.C 18044
pmbuko 16437
SirQuack 13567
CV 11677
MarkSJohnson 11437
0 registered ()
77 Guests and
3 Spiders online.
Key: Admin, Global Mod, Mod
Newsletter Signup