It is going to be tough trying to check wired in components with a multimeter. Unless you want to do a lot of unsoldering and resoldering, I would recommend against measuring parts that are wired in a circuit. I would visually inspect everything to see if anything looks burned or charred. If it does, I would replace it.
It probably wouldn't hurt to replace all the filter capacitors in the power supply. Might as well replace all the electrolytic capacitors while you are at it.
I like the idea of using a variac to gradually raise the input voltage to insure that everything is operating properly before applying full AC input.
The Rat.
M80s, VP-150, QS8s,
SVS PC 20-39+, OPPO,
Onkyo 703s, Harmony 880
Sony 60" SXRD HDTV
|