Quote:

Josh, welcome. When you say that you have the sub set to 80Hz, do you mean that's the crossover you set in the receiver(good)or that you have the crossover control on the sub itself at the 80Hz mark(not so good)? If the receiver is handling bass management the sub's own control isn't necessary and just gets in the way. It should be bypassed or turned all the way up to get it out of the crossover region.

Your 11 o'clock and -8dB settings aren't bad and change isn't essential, but you could lower that 11 o'clock a bit so that the auto-calibration raises the -8 a little to compensate.



Ok I'll try that. The reciever is controlling the crossover as I have the sub's knob turned all the way clockwise. What should the reciever crossover setting be for the sub?