Yes I mean guitar cabinets and often the SAME speaker is made in 4ohm, 8ohm, or 16ohm speaker to use in differnt quantities of speakers in different applications.
From your link, I see that the Jensens max out at 16 ohm. Hooking up 6 drivers (like the M80) in parallel assuming all the speakers are 16 ohm gives 2 2/3 ohms. You'd need nominal 48 ohm speakers throughout the cabinet to get an 8-ohm speaker. OR you can add in some resistors and waste some power from the amp as heat. OR you can start hooking up in both parallel and series, but wiring speakers in series does some bad things acoustically.
Bren R.
