|
Re: Ohms
|
Joined: Mar 2002
Posts: 184
veteran
|
veteran
Joined: Mar 2002
Posts: 184 |
Basically you have a VERY GOOD receiver and you should have no problem running a pair of M80s from it. I don't know if there is a speaker ohm selector switch on the back or not and if there is, you should set it to the lower setting for the M80s. But I would recommend that you do not use two sets of front speakers at the same time (A and B speakers) when you use speakers of such low impeadnce. You could risk driving the amp with a load that would approach 2 ohm or less and that would not be good! The receiver has (6 I think) separate amps for HT so there would be no effect on the center or surround channels. The low impedance problem would only occur on 2 sets of speakers driven by the same amps (front L and R channels).
If you have the $$$ - I say go for it!
|
|
|
Forums16
Topics24,945
Posts442,489
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
1,065
guests, and
1
robot. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|