Ok Wid, I moved things back the way they were months ago. Now I'm even more confused....
When I had my Denon 2805, I had the 350's up front below the screen between the 80's. My 600 was placed along the left side wall behind the listening area about 5 ft. The 2805 would always calibrate the distance to about 27ft. I was told this was due to the internal delay of a DSP based sub. However, if I just measured the 350's they would come out right on the money.
So, a few months ago, placed the 600 back up front, and placed one 350 to the right side of the listening area, and the other on the left wall where the 600 came from. Interesting, when I recalculated distance with the 2805, it came out about 13ft, which is about dead nuts for all 3 subs.
Jump ahead to a few nights ago. Audyssey had my subs at about 12ft which seemed fine. Tonight I have moved the 350's back up front, and the 600 back in the left wall, and guess what, I'm now getting 27.1 ft again for a distance (delay) setting.
It sounds great, but I'm trying to figure out if the 350's are being ignored or what..this is just to weird.
