Re: Ohm rating, averages, and deceit in the industry?
|
Joined: Dec 2003
Posts: 42
buff
|
buff
Joined: Dec 2003
Posts: 42 |
Raindance,
I have asked the same question, regarding appropriate receivers to use with the M80's, to both the Axiom technical line and Alan Loft (resident expert on the site for Axiom, I believe).
1) Alan only recommended the following receivers for the M80's:
Denon, Harmon Kardon, and new NAD because of their robust power supplies which will drive the 4 ohm load, despite the manufacturers warnings.
He said avoid Onkyo and Sony...they will shut down with any low impedances.
Yamaha very good with all but the 4 ohm load.
2) The Axiom techniacl department recommended Denon, Harmon Kardon and Outlaw 1050.
So I would say any of those four will be fine. I thought someone mentioned on the message board that they used the Yamaha RX-V1400 and the Axiom M80's with no problems, but as far as I can tell Axiom doesn't recommend it.
Rob
|
|
|
Entire Thread
|
Ohm rating, averages, and deceit in the industry?
|
Raindance
|
01/11/04 03:12 PM
|
Re: Ohm rating, averages, and deceit in the industry?
|
Haoleb
|
01/11/04 05:14 PM
|
Re: Ohm rating, averages, and deceit in the industry?
|
RobR
|
01/11/04 05:46 PM
|
Re: Ohm rating, averages, and deceit in the indust
|
chesseroo
|
01/11/04 05:58 PM
|
Re: Ohm rating, averages, and deceit in the indust
|
RobR
|
01/11/04 06:52 PM
|
Re: Ohm rating, averages, and deceit in the indust
|
mwc
|
01/11/04 07:29 PM
|
Re: Ohm rating, averages, and deceit in the indust
|
chesseroo
|
01/11/04 07:49 PM
|
Re: Ohm rating, averages, and deceit in the indust
|
Haoleb
|
01/11/04 08:06 PM
|
Re: Ohm rating, averages, and deceit in the indust
|
mwc
|
01/11/04 08:28 PM
|
Re: Ohm rating, averages, and deceit in the indust
|
jbzngowest
|
01/12/04 05:30 AM
|
Re: Ohm rating, averages, and deceit in the indust
|
JohnK
|
01/12/04 07:33 AM
|
Re: Ohm rating, averages, and deceit in the indust
|
chesseroo
|
01/12/04 05:37 PM
|
Re: Ohm rating, averages, and deceit in the indust
|
jbzngowest
|
01/13/04 11:15 AM
|
Re: Ohm rating, averages, and deceit in the indust
|
chesseroo
|
01/11/04 07:38 PM
|
Re: Ohm rating, averages, and deceit in the industry?
|
Saturn
|
01/12/04 02:29 AM
|
Re: Ohm rating, averages, and deceit in the industry?
|
alan
|
01/12/04 11:01 PM
|
Re: Ohm rating, averages, and deceit in the industry?
|
Raindance
|
01/13/04 06:19 PM
|
Re: Ohm rating, averages, and deceit in the industry?
|
Ken.C
|
01/13/04 08:21 PM
|
Re: Ohm rating, averages, and deceit in the industry?
|
Raindance
|
01/14/04 01:55 AM
|
Re: Ohm rating, averages, and deceit in the industry?
|
RobR
|
01/14/04 04:05 AM
|
Re: Ohm rating, averages, and deceit in the industry?
|
Raindance
|
01/14/04 05:10 AM
|
Re: Ohm rating, averages, and deceit in the industry?
|
RobR
|
01/14/04 03:52 PM
|
Re: Ohm rating, averages, and deceit in the industry?
|
austinbirdman
|
01/14/04 03:57 PM
|
Re: Ohm rating, averages, and deceit in the industry?
|
RobR
|
01/14/04 05:07 PM
|
|
Forums16
Topics24,948
Posts442,497
Members15,618
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
184
guests, and
4
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|