The problem is that in the wall is 1.5" pipe that comes to a 90 degree fitting which then was connected right to a 60 degree fitting with just enough pipe to connect them. I then cut off all but about half an inch (maybe a hair more) of the pipe coming from that and hooked up the new P-trap. I can't cut between the first 90 degree and 60 degree fittings because there is only a sliver of pipe showing. I would have to cut into the wall to get the 90 degree fitting off and start from that point. I just bought my flex drain piece for $5. It will be fixed in 5 minutes of work. Then I get to attach the sink to the vanity and caulk the sink/wall edges...
