Eeeeeewwwww! It's got cat-spit on it!
(I assume that the marks are from little wet paws?)
When I had my RPTV calibrated, I was advised to use 2 clean, soft terry cloth towels. Take a bucket of warm water, and put 1 drop of dishwashing liquid in it. Soak 1 towel in it, and wring it out really well (no dripping at all). Fold it several times, and make a smooth "pad" out of it.
You'll notice that the ridges on your Mits' screen run vertically. Wipe only in 1 direction - either top down, or bottom up, but not side to side. Use very light pressure, and immediately dry each wipe with the dry towel. Again, use only vertical passes when drying.
I've done this twice, and it works great. If you're uncomfortable with this method, you can order a screen cleaning solution from the Mits parts & service 800 number. The number is in your owner's manual.
Last edited by Michael_A; 03/15/04 02:45 PM.
