The thread started out with a different title. The drivers are V3's from my M80's that were replaced with V2's. To my ears it sounds really good. The tweeter is from my VP100.
The grill i made with my router from 3/4 mdf ,i cut it down to 3/8 by laying piece's of 3/4 mdf around it routing it down. Grill cloth i got of ebay and used my hot glue gun.In retrospect i wish i hadnt cut the corners down as much. I used neodymium magnets. These magnets are super strong but it stll took a bunch becasue of the seperation between the ones in the cabinet and the ones in the grill.The grill needs a bit of support in the middle but im still postulating on what exactly to do.
Only comment i got at the AVScience diy forum was i should have put the tweeter closer to the mids. Sounds fine to me. Measurement will get done soon . Also forgot to add some filling,so that is on the todo list.
Last edited by Socketman; 03/29/12 02:34 PM.
