Greetings,
I'm getting to the end of my basement home theatre renovation and could use a little advice on AVRs. I've installed in-wall and in ceiling M3's, an in-wall VP100, and paired that with an SVS PB-2000 (12" / 500 watt rms) for a 5.1 set up. The room is roughly 14 feet by 15 feet with a small alcove at the back. The primary seating area will be along the back wall with a tv mounted on the opposite wall.
While I understand AVR basics I thought I would check with you fine folk to see if there are any stand out AVRs that I should be aware of. Looking to keep the cost to around $400 and would like to future proof as much as I can (4K, etc). I also need it to have an ARC and discrete cross-over adjustments but other than that, I'm pretty open (don't need a lot of streaming options since the system has a dedicated HTPC).
Many thanks in advance,
Jordan
