Axiom Home Page Forums General Discussion Technical Questions Please help! Replacing tweeter in VP150 V3

The VP150 has two tweeters, so I imagine one set of wires goes to the crossover and the other runs across to the other tweeter. What does the wiring look like - two wires going into a single crimp connector, or two spades on each side of the tweeter ?

There should be some kind of polarity indication on or near the tweeter pins... maybe a '+' or a coloured mark. Find the corresponding mark on both old and new tweeters, and if they are different (eg + on one and blue paint on the other then check with Axiom re: polarity.