Thanks for all the advice, just placed my order for the VP160HP, super excited to heart in action! Hope it's as much of a difference as everyone says haha!
Any thoughts on placement? My current VP150 is shelf mounted above the TV, but I don't think the shelf will be sturdy enough for the weight of the VP160 so I'm thinking putting it under the TV. Can the speaker cabinet take the weight of a plasma? It's a 55" panasonic, it's not overly heavy. I'm assuming I'll need some sort of wedge on top to level out the screen as the speaker appears tapered to the back.
I have my 70" wall mounted and no issues. Get a good sturdy wall mount that supports the TV. What I did because feel safer is, I got a 3/4" sheet of plywood. Not particle board or chip board, Plywood good one side. I bought it at lumber store half sheet $17. 2 ' by 4'. I marked out the studs found the Centre, I was lucky hear beacuse I did rip out the wall as had a leak needed fixed. When I put the sud back in I found centre and started there. I then screwed with a Number 4 3" screw the plywood into the three studs. I then took 4 1.5" lag bolts and lag bolted the mount to the plywood. That thing is not coming of the wall with a wrecking bar
