Originally Posted By Andrew
With RCA in to the DSP and XLR out you will be fine, you'll just have 6dB of additional gain which will likely result in the same output level from your amplifier as if you had used the RCA input (assuming your amp has a truly balanced input).

Thanks Andrew. The amps are ADA1500's so I imagine they should be OK.

I will be mixing channels since I originally bought an ADA1500-4 for passive LFRs... the plan is to use that for the woofers and I ordered an ADA1500-8 for the mids & highs.

Sounds like I should keep mid/high for each of front/rear/left/right on the same amp board (guessing that's two adjacent outputs) ?

Even more useful information, thanks !!

Last edited by bridgman; 02/24/20 11:29 PM.
M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39
M5HP, M40ti, Sierra-1
LFR1100 active, ADA1500-4 and -8