I will put the responses in the same numbered format as your questions, and they are good questions:
1) The M60s do come with interchangeable feet or carpet spikes to accommodate different floor coverings. Isolation of the speaker from the floor can make a very noticeable difference depending on the floor covering and the room. This isolation from the floor results in a bass response that is true to the original design.
2) The phase will not be of any issue. This sub sounds like a good match with the M60s since it reaches down to some very low frequencies, which are below the M60s capability.
3) Standing waves are not an issue in the sub-woofer. The length of the waves at the lower frequencies and the possible effect on the woofer accuracy at the large excursion frequencies, eliminate the problem inherently.
4) As you may have deduced from other posts, I am not a fan of bi-wiring. Besides the points you made any possible advantage could be achieved by increasing the gauge of the speaker wire.
5) Yes we do, more than one in fact, and the results from our blind testing facilities are god to us.
6) A test of cable was conducted by AES some years ago and the results were conclusive, that a decent cable from the hardware store of an appropriate gauge for distance and power considerations, was comparable to some very expensive cables that they tested.
Ian Colquhoun
President & Chief Engineer
