Previous Thread
Next Thread
Print Thread
Rate Thread
Page 5 of 5 1 2 3 4 5
Re: need help with cable wire + where to place my
#125486 01/26/06 04:35 AM
Joined: Aug 2004
Posts: 6,379
Likes: 7
axiomite
Offline
axiomite
Joined: Aug 2004
Posts: 6,379
Likes: 7
I went with the FMB QS stands. They're kind of expensive (I hate spending money on stands) but you get a fair amount for the $$. I figure I'll drop a few pounds of lead shot down each of the tubes for stability and they should be pretty solid.

http://www.axiomaudio.com/fmsqs.html


M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39
M5HP, M40ti, Sierra-1
LFR1100 active, ADA1500-4 and -8
Re: need help with cable wire + where to place my qs8
#125487 01/26/06 04:38 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Mike, your speaker wires do not need to be the same length, in most setups your speakers are at different postions related to your receiver. All of my speakers in my 7.1 setup have lengths ranging from 10ft upto 30+ feet using 12 gauge wire.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: need help with cable wire + where to place my qs8
#125488 01/26/06 04:45 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
For larger rooms here is what a 7.1 setup would look like. If your sitting in that back couch, I would just start with 2 Qs8's for a 5.1 setup and either place them on the ledge behind the couch spread out as far as possible. You could even angle them in slightly if you wanted. The Qs8's are very forgiving in placement and sound good about wherever you put them...

Something tells me once you get your speakers, you will have lots of questions on calibrating them with your receiver. Not to worry, we are here for you...





M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: need help with cable wire + where to place my qs8
#125489 01/26/06 06:05 AM
Joined: Jan 2006
Posts: 107
veteran
OP Offline
veteran
Joined: Jan 2006
Posts: 107
thanks guys

I'll probably just set it up the way sirquack suggested, if it doesn't sound good, i'll get the axiom stand.

well sirquack, you have about 10 weeks before i get the speakers (as i am getting them thru factory outlet). So spend your time wisely and fully. lol




denon 3805 waiting for: M60ti QS8 VP150 EP500
Re: need help with cable wire + where to place my qs8
#125490 01/26/06 07:09 AM
Joined: Dec 2005
Posts: 3,301
connoisseur
Offline
connoisseur
Joined: Dec 2005
Posts: 3,301
It took me awhile but I tracked down where I got that info about the cable lengths, of all places it was from Aperions website. They also had this little gem of info. "There is a direct relationship between the quality of the home theater experience and the quality of the cables, particularly for long cable runs. This applies to both cost and size". Wow, they are promoting spending more on wires, they also claim monster is one of those quality cables. Although I enjoy their speakers, my respect for them just dropped a notch.



A computer once beat me at chess, but it was no match for me at kick boxing.
Re: need help with cable wire + where to place my qs8
#125491 01/26/06 02:34 PM
Joined: Dec 2003
Posts: 6,331
axiomite
Offline
axiomite
Joined: Dec 2003
Posts: 6,331
I don't pretend to speak for everybody, but I don't believe anybody has said that monster cables are "bad" cables. They are criticized for being overpriced (WAY overpriced) and for their overblown marketing claims and methods.


Jack

"People generally quarrel because they cannot argue." - G. K. Chesterton
Re: need help with cable wire + where to place my qs8
#125492 01/26/06 04:08 PM
Joined: Dec 2005
Posts: 3,301
connoisseur
Offline
connoisseur
Joined: Dec 2005
Posts: 3,301
I'm not trying to imply that monster cables are bad, what bothered me is Aperions statement that the more you pay the better it will sound, as well as some of their other erroneus imformation.





A computer once beat me at chess, but it was no match for me at kick boxing.
Re: need help with cable wire + where to place my qs8
#125493 01/26/06 04:55 PM
Joined: May 2003
Posts: 973
aficionado
Offline
aficionado
Joined: May 2003
Posts: 973
that is strange that they would make a claim like that...seems to me that the less money an enthusiast spends on "audio jewlery" the more money they'd have to spend on speakers (or higher end speakers). Could also be a "crutch" when people say their speakers don't sound right. Or they could own a lot of Monster stock.


"Chickens don't clap."
Re: need help with cable wire + where to place my qs8
#125494 01/26/06 06:07 PM
Joined: Jun 2005
Posts: 25
hobbyist
Offline
hobbyist
Joined: Jun 2005
Posts: 25
I have 12 gauge for long runs and 14 gauge for short runs. The 12 ga wire I got at Home Depot is fine but the insulation is really, really thick (thicker than the wire!) and may be difficult to bend or hide.

Monster, poor Monster...

http://www.audioholics.com/news/editorials/CESdeceptivedemos.php

Re: need help with cable wire + where to place my qs8
#125495 01/26/06 07:58 PM
Joined: Jul 2002
Posts: 1,344
connoisseur
Offline
connoisseur
Joined: Jul 2002
Posts: 1,344
One of the nice things about Axiom's speaker cable is it's sooooo flexible.


Getting to 2,000 posts; one year at a time vp160/qs8/qs4/SVS 2000/m60/Monolith 3x200 amp
Page 5 of 5 1 2 3 4 5

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,945
Posts442,484
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 696 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4