Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 10 1 2 3 9 10
Hamilton Ont area
#244616 02/03/09 07:41 PM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
New to the board ..I am looking at buying some M22 V2 for my front speaker set up.I was wondering if anyone has these speakers to audition..Thanks

Re: Hamilton Ont area
panabrite #244641 02/03/09 08:46 PM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
Check out the sticky thread at the top of this forum. I believe there is someone down towards Niagra listed with M22s.


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Hamilton Ont area
fredk #244644 02/03/09 09:03 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Welcome to the Forum!

You should also PM those listed in the sticky at the top as to a possible audition and if that yields no returns, contact Axiom to see if there is anyone nearby they could contact on your behalf for a possible audition.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Hamilton Ont area
jakewash #244645 02/03/09 09:04 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
PM stands for Personal Message. \:\)


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #244665 02/03/09 10:06 PM
Joined: Jun 2007
Posts: 4,357
connoisseur
Offline
connoisseur
Joined: Jun 2007
Posts: 4,357
 Originally Posted By: sirquack
PM stands for Personal Message. \:\)


Our Prime Minister stands for Personal Message??


The only reasonable argument for owning a gun is to protect yourself from the police.
Re: Hamilton Ont area
Ya_basta #244667 02/03/09 10:14 PM
Joined: Jun 2003
Posts: 6,833
W
Wid Offline
axiomite
Offline
axiomite
W
Joined: Jun 2003
Posts: 6,833
 Originally Posted By: wheelz999
 Originally Posted By: sirquack
PM stands for Personal Message. \:\)


Our Prime Minister stands for Personal Message??


You didn't know?


Rick


"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

Re: Hamilton Ont area
Wid #244668 02/03/09 10:18 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
No, but we always assume the people looking for an audition know what PM stands for...


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
fredk #244669 02/03/09 10:19 PM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
I just got in touch with the Huck in the Falls..Via email,His are from 2003 and has had good luck with warranty ..Issues with tweeters.

Re: Hamilton Ont area
Wid #244671 02/03/09 10:23 PM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
I would rather IM..

Re: Hamilton Ont area
panabrite #244673 02/03/09 10:25 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
PM is how you contact people within the Axiom website, much safer than IM, also not everyone has IM.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #244676 02/03/09 10:27 PM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
I was being a smart a$$

Re: Hamilton Ont area
panabrite #244705 02/04/09 12:04 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
You're fitting right in.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Hamilton Ont area
jakewash #244709 02/04/09 12:14 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Moderators, please delete this thread. ;\)


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #244726 02/04/09 01:18 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
We might as well close it, I just ordered M22's and a vp100..I will audition in my own place

Re: Hamilton Ont area
panabrite #244730 02/04/09 01:56 AM
Joined: Jun 2003
Posts: 6,833
W
Wid Offline
axiomite
Offline
axiomite
W
Joined: Jun 2003
Posts: 6,833

No better place, congrats and welcome.


Rick


"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

Re: Hamilton Ont area
Wid #244732 02/04/09 02:16 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
Thanks for having me..I am anxious to try them out..

Re: Hamilton Ont area
panabrite #244733 02/04/09 02:20 AM
Joined: Sep 2008
Posts: 4,116
connoisseur
Offline
connoisseur
Joined: Sep 2008
Posts: 4,116
Welcome to the forum panabrite!! \:\)


I’m armed and I’m drinking. You don’t want to listen to advice from me, amigo.

-Max Payne
Re: Hamilton Ont area
panabrite #244734 02/04/09 02:23 AM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
What receiver will you be using panabrite?


Half of communication is listening. You can't listen with your mouth.
Re: Hamilton Ont area
Adrian #244736 02/04/09 02:36 AM
Joined: Dec 2008
Posts: 505
B
aficionado
Offline
aficionado
B
Joined: Dec 2008
Posts: 505
Some people have no problem making a quick decision. I wonder why that is.

Re: Hamilton Ont area
Adrian #244740 02/04/09 02:45 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
Marantz 6003..Picked it up about a month ago.Very nice unit .I tried many units over the past several months.This one is a keeper

Re: Hamilton Ont area
BoB/335 #244744 02/04/09 02:59 AM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
 Originally Posted By: BoB/335
Some people have no problem making a quick decision. I wonder why that is.

Bob, once you've made the decision, just have faith in it. Listen, I started looking at Axiom a long time ago, well about 3-4 months ago. I looked at numerous speakers, just for my own peace of mind. There's nothing wrong with taking time to decide, in fact you should inform yourself before making that decision. Once you DO make the decision, stick with it, you've done your research.


Half of communication is listening. You can't listen with your mouth.
Re: Hamilton Ont area
panabrite #244747 02/04/09 03:07 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
rock on


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
panabrite #244759 02/04/09 04:26 AM
Joined: Dec 2003
Posts: 725
HAY Offline
aficionado
Offline
aficionado
Joined: Dec 2003
Posts: 725
Congrats on the purchase, good idea to quickly order before everyone starts suggesting 80's ;\)

If you want to check out the QS8's let me know as I'm in Burlington and they're fantastic speakers for surround and multi channel music.


High Gloss Cherry
M60 VP150 QS8
Open for Auditions but please don't drool on the High Gloss
Re: Hamilton Ont area
HAY #244790 02/04/09 09:53 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
A Marantz and M22s, should be a great sounding system, Congrats!


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Hamilton Ont area
HAY #244796 02/04/09 12:10 PM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
 Originally Posted By: HAY
Congrats on the purchase, good idea to quickly order before everyone starts suggesting 80's ;\)

If you want to check out the QS8's let me know as I'm in Burlington and they're fantastic speakers for surround and multi channel music.

I would love to get the 80's, But my current built in has 2 openings for speakers that I built to accept my old speakers, 24"x 10".I could rework the openings.After talking to my wife she advises,not a good idea with the little ones playing target practice on them.My current openings are off the floor 48"
I was told to run the m22 upside down to get the tweeters at ear level..

My current speakers sound descent,but I think lack highs and mids.They have one tweeter and a 7" sub and are 15 years old.
As far as the QS8's go.I would love to hear them .I am trying to convince my wife first though.I have to tell her about the center channel speaker purchase and let that sink in and let her hear the new setup.I am sure she will like it.
I did a lot of research about different speakers.I was torn between axiom for there rav reviews and Paradigm studio 40 v4 . I did listen to them in 2 different stores.Both times I was impressed, but sounded different each time.Excellent in 1 location and ok in the other .
So best place to listen, is in my own enviroment..

Re: Hamilton Ont area
panabrite #244800 02/04/09 12:26 PM
Joined: Dec 2008
Posts: 505
B
aficionado
Offline
aficionado
B
Joined: Dec 2008
Posts: 505
Very nice built-in look. Clean lines!

I don't think the M80's would work well for you because of the rear ports on the M80's.

Re: Hamilton Ont area
BoB/335 #244811 02/04/09 01:37 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
The m22's also have a bass port in back, not sure if they will work well in an enclosed area like that, the port allows low frequencies to filter into the room. I'm suprised Axiom didn't say anything about that when you called them...

Maybe you would have been better off with the W22's or the new T2's, you might have been able to incorporate them into those openings as they are designed for inwall/onwall mounting.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #244829 02/04/09 04:19 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
I'm with Randy, as soon as I saw that picture the W series was the first thing that I thought of all it would need is some minor work to close off the opnings to the correct size of the mounting bracket. They would look incredible with that set up. The other option would be the T series, in-wall. I was thinking the T80 and simply remove the panels at the bottom of the columns to get them mounted,, if there is enough depth to handle a a ~20" depth. Either way I beleive these would give you better overall performance as the rear port on the M22 will not be much of a factor and most likely alter the sound of the M22. Since you have already ordered them it will be interesting to read your opinion of them placed in that area. Just remember you can always send them back and trade up to the 'W' series.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Hamilton Ont area
jakewash #244848 02/04/09 05:31 PM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
+1 on the room. Very nice.
+1 on the w22. That seems like the ideal solution.


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Hamilton Ont area
fredk #244853 02/04/09 05:45 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
panabrite, you might call Axiom if they have not shipped yet and rethink your order.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #244872 02/04/09 06:45 PM
Joined: Dec 2008
Posts: 505
B
aficionado
Offline
aficionado
B
Joined: Dec 2008
Posts: 505
I didn't realize that the M22 had a port on the rear.

Are there rear views of the entire Axiom line?

Re: Hamilton Ont area
BoB/335 #244873 02/04/09 06:48 PM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
Go on the products page and click on "photos"


Half of communication is listening. You can't listen with your mouth.
Re: Hamilton Ont area
Adrian #244881 02/04/09 07:20 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
click photos on whatever product you looking at.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #244882 02/04/09 07:27 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
All of the Axiom regular speakers, except the VP and QS series are ported, The 'W' and 'T' series were designed to be mounted in situations in/on walls cabinets like Panabrite is doing.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Hamilton Ont area
jakewash #244888 02/04/09 07:55 PM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
I seem to remember someone here suggesting that Axiom could do a custom version of a speaker with a front firing port. Has anyone ever tried this?


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Hamilton Ont area
fredk #244890 02/04/09 07:57 PM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
If Axiom doesn't do it, maybe Fedex will.


Half of communication is listening. You can't listen with your mouth.
Re: Hamilton Ont area
Adrian #244928 02/05/09 12:09 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
I guess I will have to see if the rear port location will affect the sound stage.My entertainment unit is a wall 26" in front of my basement wall.So basically they are not enclosed in a tight boxed area.I will be bringing the speaker out of the opening about 3 inches.
That is my story and I am sticking to it ;\)

Re: Hamilton Ont area
panabrite #244931 02/05/09 12:57 AM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
So its like a false wall or second wall? If that is the case the bass coming out of the rear port is going to go into the space between the two walls rather than your room. It will affect the sound of the speaker such that you will loose some of the bottom end.


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Hamilton Ont area
fredk #244932 02/05/09 01:13 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Doesn't really have anything to do with soundstage.

The purpose of the port is to filter low frequencies into the room, I don't see based on the picture how that will be accomplished. I would still consider calling Axiom to see the status of your order and get a second opinion. I think if they were aware of your situation, they might recommend another speaker.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #244938 02/05/09 01:56 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
No sense in getting uptight at this point. I will set them up and see. They should be here tomorrow and looking forward to it. I am thinking that low of frequencies from the vent port are not going to effect the soundstage of my music to much with my style of wall unit..

Re: Hamilton Ont area
panabrite #244940 02/05/09 02:12 AM
Joined: Jun 2003
Posts: 6,833
W
Wid Offline
axiomite
Offline
axiomite
W
Joined: Jun 2003
Posts: 6,833
Hey, it's twins


Rick


"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

Re: Hamilton Ont area
Wid #244941 02/05/09 02:13 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
Lol Are you talking about the avatar?

Re: Hamilton Ont area
panabrite #244942 02/05/09 02:21 AM
Joined: Jun 2003
Posts: 6,833
W
Wid Offline
axiomite
Offline
axiomite
W
Joined: Jun 2003
Posts: 6,833

Yeah


Rick


"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

Re: Hamilton Ont area
Wid #244943 02/05/09 02:27 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
My oldest son made it for his cell phone a couple years ago and I thought it would be funny to compare.

Re: Hamilton Ont area
panabrite #244944 02/05/09 02:28 AM
Joined: Jun 2003
Posts: 6,833
W
Wid Offline
axiomite
Offline
axiomite
W
Joined: Jun 2003
Posts: 6,833

I like it, keep it.


Rick


"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

Re: Hamilton Ont area
panabrite #244949 02/05/09 03:07 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
ummm, not getting uptight, just trying to help someone not make a mistake, oh well I guess you can figure everything out yourself, not sure why you come asking questions.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #244951 02/05/09 03:08 AM
Joined: Jun 2003
Posts: 6,833
W
Wid Offline
axiomite
Offline
axiomite
W
Joined: Jun 2003
Posts: 6,833
Now don't get uptight \:D


Rick


"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

Re: Hamilton Ont area
SirQuack #244952 02/05/09 03:11 AM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
I think he was referring to himself(self reassurance) Randy. I had to read pan's comment twice, I think that's how he meant it.


Half of communication is listening. You can't listen with your mouth.
Re: Hamilton Ont area
Wid #244953 02/05/09 03:11 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Uptight? You would not like me if I was uptight. ;\) By the way Rick, I heard you had an interesting call tonight. \:\) Oh well, I'll stop hi-jacking this thread, later.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #244954 02/05/09 03:17 AM
Joined: Jun 2003
Posts: 6,833
W
Wid Offline
axiomite
Offline
axiomite
W
Joined: Jun 2003
Posts: 6,833
So I heard \:\) I was a tad busy at the time.


Rick


"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

Re: Hamilton Ont area
SirQuack #244956 02/05/09 03:28 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
 Originally Posted By: sirquack
ummm, not getting uptight, just trying to help someone not make a mistake, oh well I guess you can figure everything out yourself, not sure why you come asking questions.

Come on now,You are hurting your "Twins" feelings. \:D Yes I was referring to my own person,No one else .Oh by the way I do really appreciate the input.

Re: Hamilton Ont area
SirQuack #244974 02/05/09 11:15 AM
Joined: Dec 2008
Posts: 505
B
aficionado
Offline
aficionado
B
Joined: Dec 2008
Posts: 505
 Originally Posted By: sirquack
By the way Rick, I heard you had an interesting call tonight. \:\) Oh well, I'll stop hi-jacking this thread, later.


An "interesting call", hey? So where does that leave the rest of us here? (Wish I could paste in a guy hanging from a rope by his neck)

Re: Hamilton Ont area
BoB/335 #244978 02/05/09 12:09 PM
Joined: Feb 2005
Posts: 5,210
axiomite
Offline
axiomite
Joined: Feb 2005
Posts: 5,210
I believe with the 24"x 10" opening that Panabrite has, he'll be fine with the ports and and his in-wall placement.

Whenever I built our room I was going to enclose a pair of 60s in the back wall for rear surrounds and was told by Axiom that so as long as I had approximately 4 or so inches of clearance behind and to the sides or top there would be no SQ loss, and with that clearance the ports would be perfectly fine. I went so far as asking if that setup would work for the mains and was told it would work 'perfectly fine'.

The dimensions of the M22s are H W D (inches): 19.8" x 7.3" x 8", so with his 24" by 10" opening Panabrite should be fine as long as there is clearance for the back of the speakers.

Beautiful setup Panabrite, welcome and enjoy!


Rick
Our Room

smile
Re: Hamilton Ont area
RickF #244981 02/05/09 12:30 PM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
Reading your post made my day..I am hoping they sound great.If not live and learn and deal with it.Before I purchased these I did call them and mentioned by situation and height location and the only concern or opinion I got was maybe place them upside down so the tweeter is more ear level.I did say I would send a pic, but ended up posting on here after purchase.
Did you ever do your built ins?
Ps I wish I was in Florida right now, -24c here

Last edited by panabrite; 02/05/09 12:31 PM.
Re: Hamilton Ont area
panabrite #244983 02/05/09 12:44 PM
Joined: Feb 2005
Posts: 5,210
axiomite
Offline
axiomite
Joined: Feb 2005
Posts: 5,210
No actually I went with a pair of QS8s for the back, I couldn't make the in-wall build with the room I was working with. I was thinking about being more concerned with the height more than anything else, hopefully with the tweeters upside down you'll be fine ... also you *may* have the room in the enclosure to tilt them down a little, that may help.

It's 27 here in Vero this morning, unusually cold for us ... I'm freezing.


Rick
Our Room

smile
Re: Hamilton Ont area
RickF #244997 02/05/09 03:12 PM
Joined: May 2003
Posts: 18,044
shareholder in the making
Offline
shareholder in the making
Joined: May 2003
Posts: 18,044
Hey panabrite,

While your solution may not be optimal, I don't think it's nearly as bad as people are making it out to be. Try it, see if you like it, and let us know! There's always fixing it later.

Just to add to your confusion, though, you should know that Axiom will be introing some speakers called T80s, which are M80s specifically designed to be integrated into a cabinet like yours (assuming yours is around 2 feet deep).

Oops... sorry... ;\)


I am the Doctor, and THIS... is my SPOON!
Re: Hamilton Ont area
Ken.C #245003 02/05/09 03:19 PM
Joined: Sep 2004
Posts: 11,458
shareholder in the making
Offline
shareholder in the making
Joined: Sep 2004
Posts: 11,458
 Originally Posted By: kcarlile
T80s, which are M80s specifically designed to be integrated into a cabinet like yours (assuming yours is around 2 feet deep)


Looking at your photo again (beautiful room, BTW!), I think the height of those T80 tweeters would be perfect! \:\)


::::::: No disrespect to Axiom, but my favorite woofer is my yellow lab :::::::
Re: Hamilton Ont area
MarkSJohnson #245137 02/05/09 09:19 PM
Joined: Jun 2003
Posts: 8,488
T
axiomite
Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
I'm inclined to agree with RickF and Ken; I think you'll be just fine with the M22's in those openings. As long as the port can "breathe" (i.e. it's not sealed into a different space than the listening space and it has adequate clearance), everything should be dandy. On a sonic basis, I agree with the suggestion to put them updside-down, but that might look kinda freaky. I bet you'll be pleased. If not, you can always try the W22's.


bibere usque ad hilaritatem
Re: Hamilton Ont area
tomtuttle #245147 02/05/09 09:37 PM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
Well.. They arrived and did not get delivered.Wife was home all day and at 11:50 this morning finds a note on the door saying to pick them up at the warehouse.We have had many shipments to the house and always answered.Our furry 4 legged door bell never misses a knock at the front door. I think -24 was enough to just put a note on the door and continue down the road to deliver the very small single packages and deliver the large 3 item packages back on a loading dock and call it a day..
My Rant...
6:00pm I can go and get them ..Thanks for the input guys.When are the T80s coming out?

Re: Hamilton Ont area
panabrite #245162 02/05/09 10:56 PM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
Under the "news" heading on the front page there is mention of the T80s coming out over the next months (nothing definite). If this is something you might want to persue, I would fire an email to, or call up Axiom and see if they can give you a better idea. These speakers will open up alot of possibilities for dedicated HT's. \:\)
I hope the delivery guy didn't take your speakers back to the warehouse because the boxes were in too good a shape ;\) Just kidding, but nothing would surprise me.


Half of communication is listening. You can't listen with your mouth.
Re: Hamilton Ont area
Adrian #245258 02/06/09 03:12 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25






SPEECHLESS

Re: Hamilton Ont area
panabrite #245259 02/06/09 03:15 AM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
\:D


Half of communication is listening. You can't listen with your mouth.
Re: Hamilton Ont area
Adrian #245278 02/06/09 03:54 AM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
I would call FEDEX and inform them when THEY will deliver the packages to you.


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Hamilton Ont area
fredk #245814 02/09/09 12:56 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
Well..I am done playing for the weekend. Very enjoyable,I am very pleased with the speakers.The issues I had with my existing openings was no concern with sound quality. I tried them in the opening and outside the opening, no difference.The vp 100 was a great upgrade from my original center speaker.I did have to run the m22 upside down for better performance in the room.
I am no audiophile and I am having a lot of fun playing with the system and room configuration. The m22 did perform great,But I am thinking they are a little undersized for my room. I have been comparing my existing front speaker upside down now and I am thinking they just sound better to me with the new vp 100 .They just seem to "fill" the room more.
I am thinking that the perfect fit would have been the m80's.The only problem is I can't do it,My wife watches little ones through the week and they would have a "hay day" with them.
I do love the sound the m22 have,Very crisp and clear.I am wondering if I should go with the QS8 v2 on the sidewalls?
I have been reading some posts in here comparing the m22 to the QS8's and they compare in sound.

This is the size of the room

I wondering if I put the QS8's on the two columns if this would sound good?

The problem is we have so many different listening spots in the room.Some input would be Great
Paul

Re: Hamilton Ont area
panabrite #245816 02/09/09 01:17 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
When you say they don't "fill" the room, are you talking bass, treble, or just overall power? Are you talking music cranked up, or movies? Are you incorporating a sub, and if so, have you calibrated everything correctly?

Just trying to understand where they are lacking for you? I know you say you tested them within your enclosure and out, but speakers are reinforced by the walls around them. It appears it is open behind those openings, so in my opinion you will loose some performance.

If you have a sub, are the speakers set to small in the receiver, and are you using 80hz crossover in the receiver, and bypassed on the back of the sub?


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #245823 02/09/09 02:03 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
We tweaked everything on the sub.Set up the receiver for the new speakers.They are set to large ,sub is doing a great job.We tested the speakers in front of the entertainment unit with the holes closed off because of our concerns with loosing performance...You guys "spooked" me.
When I said they "seem to fill the room more" I wasn't saying the m22 where not filling the room .I just find that I am satisfied with my fronts in a new configured way with new front center.It is hard to explain in words.They have a warm filling sound.I even said to my wife if I could run all of them together It would be perfect.Hence QS8's

Re: Hamilton Ont area
panabrite #245825 02/09/09 02:07 AM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
If you're happy, hold off for the T80s ;\)

I wonder if two sets of side surrounds would work in a situation like that. Dunno?? Maybe ask Alan.


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Hamilton Ont area
fredk #245828 02/09/09 02:23 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
I would love to wait for those ..I cant have them because of the kids.
That's why I was thinking about adding the QS8's in the middle of the room on the columns..Same height as the backs.Run the system in 7.1 Multi channel.If that makes sense.Hey No Glass of beer Icon? ;\)

Re: Hamilton Ont area
panabrite #245830 02/09/09 02:26 AM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
Why not go with the T80s and just put a lockable cabinet door over the front?


Half of communication is listening. You can't listen with your mouth.
Re: Hamilton Ont area
Adrian #245832 02/09/09 02:40 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Panabrite, it sounds to me like you are prefering the warmer/ more mellow sound of your old fronts better than the M22s, correct? I guess you do not find the mismatched timber to be bothersome with your old mains and the VP100 compared to the M22s and the VP100.

I would do as you are suggesting and run QS8's in the areas you are suggesting and run the system in 7.1 for even more envelopment, to get a reasonable idea of what it would be like, try using the M22s or your old mains positioned as highup on ladders as possible in those, or as close to, those spots as possible to see if you find a 7.1 configuration worth the money. I think you could also just install a set of QS8 in place of your present surrounds for much better surround experience.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Hamilton Ont area
panabrite #245837 02/09/09 03:04 AM
Joined: Jun 2003
Posts: 6,833
W
Wid Offline
axiomite
Offline
axiomite
W
Joined: Jun 2003
Posts: 6,833

What sub are you using?


Rick


"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

Re: Hamilton Ont area
Wid #245869 02/09/09 01:01 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
I would set your 22's to small, they can't produce the low freq's and move air like the sub can. Your sending freq's to the 22's it can't produce.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #245873 02/09/09 01:09 PM
Joined: Sep 2004
Posts: 11,458
shareholder in the making
Offline
shareholder in the making
Joined: Sep 2004
Posts: 11,458
I second the "small" setting!


::::::: No disrespect to Axiom, but my favorite woofer is my yellow lab :::::::
Re: Hamilton Ont area
jakewash #245941 02/09/09 09:45 PM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
 Originally Posted By: jakewash
Panabrite, it sounds to me like you are prefering the warmer/ more mellow sound of your old fronts better than the M22s, correct? I guess you do not find the mismatched timber to be bothersome with your old mains and the VP100 compared to the M22s and the VP100.

I would do as you are suggesting and run QS8's in the areas you are suggesting and run the system in 7.1 for even more envelopment, to get a reasonable idea of what it would be like, try using the M22s or your old mains positioned as highup on ladders as possible in those, or as close to, those spots as possible to see if you find a 7.1 configuration worth the money. I think you could also just install a set of QS8 in place of your present surrounds for much better surround experience.


Your posts sums it up.Don't get me wrong guys I like both sounds experiences..This is why I am thinking about using the QS8's in the mix and be able to run my old faithfuls also.I am going to experiment tonight with different positions in the room .
I am running an Audioshere sub and it really works great.
What is "mismatch timber"?I am on a learning curve here..

Re: Hamilton Ont area
panabrite #245945 02/09/09 09:53 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
your speakers should be the same brand/drivers to be "voice matched"..


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #245947 02/09/09 10:09 PM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
This is what "mismatched timber " means.I will have to listen carefully to see if I can hear this

Re: Hamilton Ont area
SirQuack #245948 02/09/09 10:14 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Definition I pulled off the web for timbre:How the ear identifies and classifies sound. Example: the timbre of the same note played by two different instruments (flute and tuba) will not be the same

Let's say a trumpet plays through the VP100 then for some reason moves to the left speaker, the trumpet's notes may sound higher or lower pitched through the LR speakers than it does from the VP100.

Another example would be a voice that sounds clear and concise on the VP100 might end up coming through the LR main for a split second as the actor leaves the scene, the voice may not be as clear and concise(the reason I am sure you prefer the VP100 to your old center), this difference may or may not bother you. I know it bothers me when I hear it.

Usually sticking with the same manufacturer and speaker line across the front eliminates this mismatch in tone. Some people are irritated by this change in tone/timbre others not so much.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Hamilton Ont area
jakewash #245949 02/09/09 10:25 PM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
One way to explain timbre matchinging would be something like a train moving from left to right across your HT (not literally!!). You should hear, correction, "not hear" the transition between one speaker and another as the sound moves through from left to right, it should be 'seamless'. Sometimes when different speakers are used, or are poorly timbre matched you would hear a pitch change as the sound goes from speaker to speaker. (::making train sounds....weeee....aaaaaahhh....woooohhhh(wrong)----weeee....eeeeaah...aaahhhw(correct)::) man! I feel like an 'audiopile' now! NOT!!


Half of communication is listening. You can't listen with your mouth.
Re: Hamilton Ont area
jakewash #245951 02/09/09 10:28 PM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
Thanks .I totally understand now. I am going to have some fun now.. \:\)

Re: Hamilton Ont area
panabrite #245978 02/10/09 01:45 AM
Joined: Feb 2005
Posts: 5,210
axiomite
Offline
axiomite
Joined: Feb 2005
Posts: 5,210
That did not sound like a train to me Adrian ... you need to try it again.

\:D


Rick
Our Room

smile
Re: Hamilton Ont area
RickF #245982 02/10/09 01:54 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Reminds me of Hee Haw.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #245997 02/10/09 02:59 AM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
After listening with the speakers in different configurations.I think that the Qs8s are not my solution .I found the multi channel just to much, almost fake sounding on certain songs..The music did not sound as true as the 2 channel stereo.Mind you I was using the m22s in the column locations on there sides roughly in height..The M22's up front are crisp and clean sounding .I think my conclusion is a larger left and right speaker for my room size.I just fired an email off to Axiom to see when the T 80's are available .My old speakers do sound good but they are not as crystal clear on the highs, the m22's I think are a little small for my configuration.I tried setting them to small, adjust the sub levels .Eq levels .Need a little more. I guess that is why they make different sizes..

Re: Hamilton Ont area
panabrite #245998 02/10/09 03:11 AM
Joined: Mar 2005
Posts: 7,463
Likes: 1
axiomite
Offline
axiomite
Joined: Mar 2005
Posts: 7,463
Likes: 1
Give it a few days and tweek with the sub settings and if you still don't like it, trade up for something bigger. You do have a big room to fill.

I dunno, I always like to give speakers a good run through before making any final decisions.


***********
"Nothin' up my sleeve. . ." --Bullwinkle J. Moose
Re: Hamilton Ont area
RickF #246002 02/10/09 03:19 AM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
 Originally Posted By: RickF
That did not sound like a train to me Adrian ... you need to try it again.

\:D
wwwsssssssssss........ssSSSSWWWWWWwrrr.....rrrrrrwwwwwwaaaaaaa!!!!


Half of communication is listening. You can't listen with your mouth.
Re: Hamilton Ont area
Adrian #246005 02/10/09 03:32 AM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
Herd of cocroaches on a Saturday night?


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Hamilton Ont area
fredk #246007 02/10/09 03:35 AM
Joined: Dec 2008
Posts: 6,928
axiomite
Offline
axiomite
Joined: Dec 2008
Posts: 6,928
...getting sprayed with a can of "Raid" at the end(aaaaaa!!!!)


Half of communication is listening. You can't listen with your mouth.
Re: Hamilton Ont area
Adrian #246029 02/10/09 05:14 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Make sure you have enough in the wall for the 80's, they take up lots of room. Width and Height, are the same as the regular floorstanding models. Can't remember what your driving your system with, make sure it is stable with a 4ohm load.



M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
SirQuack #246031 02/10/09 05:17 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13



M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Hamilton Ont area
panabrite #246049 02/10/09 08:04 AM
Joined: May 2008
Posts: 105
veteran
Offline
veteran
Joined: May 2008
Posts: 105
Having a quick gander at your thread and thought I would offer a suggestion somewhat similar to what you were thinking about doing with the QS8. I was having a similar problem with my system and the dipoles I purchased

(yea it's not Axiom but the good people here let me stay as long as I contribute something worthy once in a while \:D )

Anyways the Dipoles just didn't sound right in the rear, there just seemed to be something missing - It was suggested to me to try and move the Dipoles to be used as rear sides and to try and use a pair of direct speakers for my rears to complete the 7.1.

That did it, that's exactly what was missing.

Re: Hamilton Ont area
lucv13 #246091 02/10/09 04:23 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Panabrite, just curious as to the positioning of the M22's when you tested upfront and outside of the wall opening, were they setup on stands with the tweeters at/near ear level? I have noticed that in some rooms if they are not positioned well you will not get maximum performance out of them and they can sound weak.

I also suspect your sub is due for an upgrade, I haven't been able to find much info on Audiosphere subs and the little I have found, suggests it is ~10-15 years old. The subs these days reach alot lower and a lot flatter, this can make the M22s seem like floor standers even in rooms as large as yours, at least within the listening area, as the listening area doesn't look to be that large. The M22s + good sub, really do sound much like the M80s with no sub and if your sub is older as I suspect I think it would be nearly drowned out by the M/T80s, I know my old sub was, I barely knew it was on for many things I listened to, the upgrade in sub made a world of difference for the M22s and the M80s. Just one more thing to consider in this audio puzzle


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Hamilton Ont area
jakewash #246358 02/11/09 09:45 PM
Joined: Feb 2009
Posts: 25
hobbyist
OP Offline
hobbyist
Joined: Feb 2009
Posts: 25
Yes I did have the speakers out of the holes and covered them also .I ran them upside down also to get the tweeters more at ear level.Yes my sub is old but it really does a good job with the lows .I should go and listen to some new ones and see the difference. I am running a 6003 Marantz,good for 6 ohms 125w each channel or 8 ohms 100w each channel according to the manual.I called the company I bought the receiver from and they say it should handle 4 ohms speakers ,Lots of ventilation and not cranked to the max for hours. He didn't try to sell me an Amp.that's a good sign.Also axiom rep said it should handle the m80's also.
Axiom also said T80's are available now and by the end of February T60 will be available to audition.Same prices as m80's and m60's
It may be worth the drive...

Page 1 of 10 1 2 3 9 10

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,945
Posts442,480
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 686 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4